Assess food and non-food liquid, air and surfaces using this TPI GK13M FEP Insulated Beaded Tip Probe, which has a 48" lead. This probe works in temperatures ranging from -165 to 400°F (-110 to 204°C) and has a sub-mini connector.

Features

Crafted with PTFE insulation material
Temperature range is -165 to 400°F (-110 to 204°C)
Beaded tip
Sub-mini connector
48" (1.2 m) lead
24 gauge diameter
Exposed junction for fast response in food and non-food liquid, air and surface applications

Use the TPI A776 Static Tip for Manometers to measure static pressure. A built-in magnet allows for placement inside of ductwork, so long as you have access through a 0.25" (6.35 mm) hole.

Features

Works with TPI manometers and combustion analyzers with built-in manometers (each sold separately)
Use to measure static pressure
Built-in magnet allows you to secure the static tip inside ductwork (requires a 0.25" hole)

The TPI AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system.

To use it's as simple as touching the plastic tip onto any connecting point or move it along an insulated wire. You will be notified if AC voltage is found by a sounded alarm and the plastic tip will glow a bright red. It will turn off at the next break in circuit or wire.

Features

Prevents electrical shocks
Measures: 50 to 1,000 VAC
No switch is required, always ready for use
Sound and bright red glow indicates voltage, buzzer will only react to AC voltage and not static electricity
UL listed
Lifetime Warranty
Applications

AC Voltage in Switches
AC Voltage in wall outlets
AC Voltage in junction boxes

The slim design 285 is a hand-held, auto ranging clamp-on DMM with Bluetooth output for use with the TPI View app. Backlit dual display, True RMS response, Frequency with Duty Cycle, Min/Max/Avg, Temperature, Inrush Current measurement, Capacitance, DC microamps, and Non-Contact Voltage detection are just a few of the features of the 285.

The TPI View app can be used in conjunction with the 285 to store measurements to jobs, create and email test reports, view live readings from a safe distance, or print measurements to the optional A711BT printer.

True RMS for accurate voltage and amperage measurements
In-Rush Current measurement to capture motor start up current
Non-Contact Voltage detection through the jaw
Bluetooth LE communication
Use with TPI View app to display live readings, save measurements, create and email reports with GPS tagged date and time
CATIV 600V rated for safety

Differential Manometer grouped together with T Fittings, Static Tips, Tubing and a carrying case.

Features

Dual input with ±120" H2O range
0.001" H2O maximum resolution
Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
Display – 4 digit with backlight
Smooth – Stabilizes display when measuring fluctuating pressures

40 PPM methane sensitivity, detects combustible gases including: Methane, Butane, Propane, Gasoline, Diesel and Kerosene. Tick rate can be nullified to eliminate background gas concentration and pinpoint the leak source.

40ppm methane sensitivity and bearing defects
Trace natural gas lines and fittings for leaks frame to failure
Check gas equipment for leaks
Test propane tanks, fittings, lines, and heaters for leaks
Check propane tanks, fitting lines, and heaters for leaks
Test confined spaces for gas build-up

The TPI 709 Flue Gas Analyzer is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.
All the features of the 708 PLUS high resolution 0.001 in H20 differential manometer for high efficiency and oil equipment
Calculates combustion efficiency
Pump driven for fast response
Will not shut off if 15 ppm CO is present for increased safety
Optional A740 IR printer available for hard copies of test results
Built-in differential thermometer
Store function to save up to 50 readings
Push on fittings for fast and easy use
Large easy to read backlit display
Ten selectable fuels

Includes Carrying Case, Flue Probe and NIST Certification!
Operate remotely via Bluetooth using your Smartphone or tablet and the free TPI app. No need for long probe hoses – you can be at the control center with your smartphone, while the DC710 does the work at the stack.
The free TPI app provides on-site reports which can instantly be emailed and stored without the need for paper or printers.
24-Hour real-time clock for accurate documentation.
Powerful magnetic and/or hook mounting.
Durable, rugged and sealed housing.

0.01 inH2O resolution
High accuracy +/-0.02 inH2O less than 1 inH20; 1.5% above 1 inH20
Temperature compensated
Trim mode to stabilize fluctuating readings
Seven units of measure: mbar, inH2O, kPa, PSI,
mmHg, inHg, and mmH2O.

This wireless vacuum gauge lets you obtain accurate vacuum measurements during evacuations of HVAC/R and refrigeration systems. It's ideal for obtaining data while conducting time, target, dynamic and static vacuum tests. It may be used as a standalone gauge, or it may be paired with a mobile device (using the free CPS Link app).

This digital vacuum gauge monitors evacuation procedures from start to finish. A simple 2-button operation gives the flexibility to select or change units: microns, millibar, Torr and inES/HG.

This infrared thermometer provides easy and instant temperature measurements for a wide range of applications. It offers convenient 1-hand operation, laser-point sighting, a backlit LCD display, °F/°C selection, an automatic power-off feature, a built-in LED light and a K-Type input.

This Celsius scale thermometer comes with a 1" (25.4 mm) dial, a 5" (127 mm) stainless-steel probe and a pocket clip.

This Fahrenheit scale thermometer comes with a 1" (25.4 mm) dial, a 5" (127 mm) stainless-steel probe and a pocket clip.

Use this solenoid valve to accurately measure gas or liquid flowing through hoses. It can also manually or automatically charge or recover refrigerants.

Combines the SPM-100 and the PRB-KIT and includes a brass gas fitting.

This wireless pressure and temperature gauge is a compact, portable instrument for accurately measuring and calculating HVAC/R data, such as pressure, SuperHeat, SubCool and temperature differential.

This portable multifunction meter has an LCD display and backlight and is versatile enough for testing AC/DC voltage, AC/DC current, resistance and frequency. It features an automatic measuring range and manual measuring range, non-contact voltage detection and True Inrush measurement.

This airflow meter instantly converts air speed into air volume and records data to a history log. It also measures temperature, humidity and pressure and connects wirelessly to smartphones and tablets utilizing Bluetooth Smart technology.