Assess food and non-food liquid, air and surfaces using this TPI GK13M FEP Insulated Beaded Tip Probe, which has a 48" lead. This probe works in temperatures ranging from -165 to 400°F (-110 to 204°C) and has a sub-mini connector.

Features

Crafted with PTFE insulation material
Temperature range is -165 to 400°F (-110 to 204°C)
Beaded tip
Sub-mini connector
48" (1.2 m) lead
24 gauge diameter
Exposed junction for fast response in food and non-food liquid, air and surface applications

Use the TPI A776 Static Tip for Manometers to measure static pressure. A built-in magnet allows for placement inside of ductwork, so long as you have access through a 0.25" (6.35 mm) hole.

Features

Works with TPI manometers and combustion analyzers with built-in manometers (each sold separately)
Use to measure static pressure
Built-in magnet allows you to secure the static tip inside ductwork (requires a 0.25" hole)

Silicone pressure tubing
For combustion analyzer and digital manometers
6' Length

With the TPI A605 Tapered T Fitting for Manometers, you can measure pressure with your compatible TPI manometer or combustion analyzer. The T fitting is tapered and measures 0.25" (6.35 mm).

Features

Compatible with TPI 610, 615, 620 and 625 manometers (sold separately)
For use when performing pressure measurements or setting pressure switches

The TPI AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system.

To use it's as simple as touching the plastic tip onto any connecting point or move it along an insulated wire. You will be notified if AC voltage is found by a sounded alarm and the plastic tip will glow a bright red. It will turn off at the next break in circuit or wire.

Features

Prevents electrical shocks
Measures: 50 to 1,000 VAC
No switch is required, always ready for use
Sound and bright red glow indicates voltage, buzzer will only react to AC voltage and not static electricity
UL listed
Lifetime Warranty
Applications

AC Voltage in Switches
AC Voltage in wall outlets
AC Voltage in junction boxes

The slim design 285 is a hand-held, auto ranging clamp-on DMM with Bluetooth output for use with the TPI View app. Backlit dual display, True RMS response, Frequency with Duty Cycle, Min/Max/Avg, Temperature, Inrush Current measurement, Capacitance, DC microamps, and Non-Contact Voltage detection are just a few of the features of the 285.

The TPI View app can be used in conjunction with the 285 to store measurements to jobs, create and email test reports, view live readings from a safe distance, or print measurements to the optional A711BT printer.

True RMS for accurate voltage and amperage measurements
In-Rush Current measurement to capture motor start up current
Non-Contact Voltage detection through the jaw
Bluetooth LE communication
Use with TPI View app to display live readings, save measurements, create and email reports with GPS tagged date and time
CATIV 600V rated for safety

Compact easy to use thermometer with large display.
315C Pocket Digital Thermometer

Auto field calibrate to ±2˚F in less than 10 seconds using ice water.
Field calibrate to ±2°F
Tapered stem (3.1 mm diameter) to fit into a Pete’s Plug
Reinforced, heavy-duty housing for strength
Waterproof (IP63)
Penetration tip
-58°F to 300°F (-50°C to 150°C)
Fits in your pocket
3-year limited warranty

Differential Manometer grouped together with T Fittings, Static Tips, Tubing and a carrying case.

Features

Dual input with ±120" H2O range
0.001" H2O maximum resolution
Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
Display – 4 digit with backlight
Smooth – Stabilizes display when measuring fluctuating pressures

40 PPM methane sensitivity, detects combustible gases including: Methane, Butane, Propane, Gasoline, Diesel and Kerosene. Tick rate can be nullified to eliminate background gas concentration and pinpoint the leak source.

40ppm methane sensitivity and bearing defects
Trace natural gas lines and fittings for leaks frame to failure
Check gas equipment for leaks
Test propane tanks, fittings, lines, and heaters for leaks
Check propane tanks, fitting lines, and heaters for leaks
Test confined spaces for gas build-up

The TPI 709 Flue Gas Analyzer is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.
All the features of the 708 PLUS high resolution 0.001 in H20 differential manometer for high efficiency and oil equipment
Calculates combustion efficiency
Pump driven for fast response
Will not shut off if 15 ppm CO is present for increased safety
Optional A740 IR printer available for hard copies of test results
Built-in differential thermometer
Store function to save up to 50 readings
Push on fittings for fast and easy use
Large easy to read backlit display
Ten selectable fuels

Includes Carrying Case, Flue Probe and NIST Certification!
Operate remotely via Bluetooth using your Smartphone or tablet and the free TPI app. No need for long probe hoses – you can be at the control center with your smartphone, while the DC710 does the work at the stack.
The free TPI app provides on-site reports which can instantly be emailed and stored without the need for paper or printers.
24-Hour real-time clock for accurate documentation.
Powerful magnetic and/or hook mounting.
Durable, rugged and sealed housing.

0.01 inH2O resolution
High accuracy +/-0.02 inH2O less than 1 inH20; 1.5% above 1 inH20
Temperature compensated
Trim mode to stabilize fluctuating readings
Seven units of measure: mbar, inH2O, kPa, PSI,
mmHg, inHg, and mmH2O.

This plastic holding razor blade scraper is designed with a high-quality ergonomic rubber grip, making it perfect for scraping hard to remove substances. The screw locks and holds the blade stably.

Features/Benefits

Ergonomic Grip
Thumbscrew blade lock
Uses standard straight edge blades

BRUSH, COIL, REFRIGERATION, 27-1/2 IN

1-1/2 in and 3/4 in bristle length
12 in brush length
27-1/2 in long
Wood Handle

Telescoping tools match clip, magnet and inspection mirrors

Features/Benefits

2 ¼" x 3 ¼" rectangular glass mirror
Carry pouch included
Double ball joint head adjustment
Extendable/retractable design
Glass mirrors
Magnified glass mirror available with IM9
Vinyl grip handle

2.25" diameter round mirror on a telescoping handle, used to see around corners and under hard to reach areas.

Features/Benefits

2 ¼" round glass mirror
Double ball joint head adjustment
Extendable/retractable design
Vinyl grip handle

Telescoping tools match clip, magnet and inspection mirrors

Features/Benefits

1" x 2" oval glass mirror
Carry pouch included
Double ball joint head adjustment
Extendable/retractable design
Glass mirrors
Magnified glass mirror available with IM6
Pocket clip

Telescoping tools match clip, magnet and inspection mirrors

Features/Benefits

1 ¼" round glass mirror
Carry pouch included
Double ball joint head adjustment
Extendable/retractable design
Glass mirrors
Magnified glass mirror available with IM5
Pocket clip

Fin whisk brush

Features/Benefits

Long lasting, sturdy Bristle Design

Designed by a real technician in the field, this high-powered magnetic compressor cooler uses garden hose water to quickly cool overheated compressors for a hands-free, no mess solution.

Features/Benefits

Creates a Powerful Cascade of Water
Hands Free - Saves Time
High Powered Magnet and Garden Hose
No Messy Backsplash

The VCGT3 is designed to easily and safely replace standard valve cores. Its unique patent pending gripping action, and rugged stainless steel construction make this a 'must-have' tool for anyone who works with valve cores.

Features/Benefits

¼" and ⅜ Gasket Installer
Easy to use

This technician invented clamp level takes the headache out of balancing levels on copper pipe or PVC. Just clamp it on & level up your HVAC and Plumbing game.

Features/Benefits

Level pipe sizes from 3/8" to 2"
Clamp firmly attaches to pipe for hands free leveling
Made of durable ABS plastic
Part of our SUPCO® TradeFox™ Technician-Invented product line

BOOT, NITROGEN, PURGE, 5 IN, HVAC/R

Invented by an HVAC technician, this pocket-sized tool allows you to engage multiple circuits at the same time during system troubleshooting. Plus, it has removable banana plugs so you can connect your volt meter to create an extended fused jumper wire.

Features/Benefits

3 Amp Fusible Link
Convienient, space saving size
Female banana terminals
Magnetic jumper leads w/ removable rubber caps
Part of our SUPCO® TradeFox™ Technician-Invented product line
Removable banana plugs

TradeFox® and Solderweld® have teamed up to offer technicians a high-density, compact kneeling pad designed for optimal comfort so you can focus on the job.

Features/Benefits

High-Density EVA foam Construction
Excellent shock absorption and cushioning
Compact size and handle for easy carrying and storage
Dual-sided branding

The Jumper King° allows you to quickly bypass any low voltage thermostat regardless of terminal style. This patent-pending all-in-one kit comes with everything you need to locate low-voltage shorts and eliminate compressor short cycling.

Features/Benefits

2-Spade Adapters, Jumper King° Thermostat Bypass Tool, Hard Carrying Case
6-Alligator Clips, 6-Magnetic Tips, 6-Jumper Leads, 6-Self Piercing Insulation Tips
For Use on low voltage circuits only (0-30VAC/VDC)
Four types of interchangeable tips: spade adapters, alligator clamps, magnetic tips and self-piercing insulation tips
Inovative selector switches to activate leads/circuits of your choosing at any time
No batteries required - powered by the low voltage in theA/C unit
Rugged unit has a rubberized boot, a magnet and fold-out hook for convenient mounting
Will never short out - contains a resettable popper fuse
Works on multiple stage units including heat pumps

A universal way to secure the disconnect to the unit, without blocking access to the electrical panel.

Features/Benefits

Designed to fit various layouts of single phase disconnects
Cross pattern mounting allows for universal installations
Hex nuts for easy installation with 5/16" nut driver
Eliminates potential damage to the unit during installation
Made of weather-resistant galvanized metal
Part of our SUPCO® TradeFox™ Technician-Invented product line