Cartridge Bearing; 3/4" Bore; 2-17/32" Outside Diameter; 1" Cartridge Housing Width; Concentric Collar; Cartridge Unit Housing; Rubber; Ball Bearing; 1.38" Length Thru Bore; Not Relubricatable; SLRB-112 Insert; Single Lip Contact Seal; Non-Expansion

These black Mechanix Wear FastFit MFF-05 mechanics gloves are size small and are made with tricot, synthetic leather, and TrekDry. In addition, they have nylon stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a shirred slip-on cuff, and an EN 388 Rating of 2121X. They feature pull straps, reinforced thumb crotch, and touchscreen compatibility.

Finds leaks quickly & easily.
Solvent free, safe for all refrigerantion systems and equipment.
Compatible with all lubricants and refrigerants.
Anti-wear agents and friction modifiers enhance compressor and A/C system efficiency while reducing compressor wear.
Anti-oxidants protect system against formation of sludge & other deposits.

Reusable – works with all Supercool syringes.
Allows adding products directly to charged A/C systems.

The core remover/installer tool is designed to remove and install a valve core without losing system charge.

The TCAP Capillary Tube Cutter cleanly cuts all types of refrigerant capillary tubing without constricting, swaging, or flattening.

PRO-SET® TUBE CUTTERS

CAPACITOR, OVLD AND START, RLY, 230V, 7.5A

Prevents low voltage starting problems
Replaces relay, overload and provides a boost for hard start and unbalanced systems
Wire designations - white/start, black/common, red/run

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)

COUPLER, BRS

1-1/4 in piece of 1/4 in copper tubing
Double flared on one end with 1/4 in female flare nut and depressor tip
End of female flare swaged to allow 1/4 in copper tube to enter
Made of CDA 360 brass

This mini tube cutter features patented Set and Cut technology that provides easy tube cutting with little or no readjustment required.
Mini Tube Cutter 1/8″ to 7/8″

High intensity Mag-Num Star® XENON Bulb
Far-reaching beam
Extends battery life
Use with alkaline batteries only
Upgrade the current Krypton bulb with this Xenon

COUPLER, BRS, MA FLARE X ACME FEM SWIVEL

Depressor tip and seal
Made of CDA 360 brass
Application Use to Make Connection Between with Unlike Threads
Nominal Size 1/4 in Male Flare x 1/2 in Acme Female Swivel
Connector Type Male Flare x Acme Female Swivel

Hermetically designed moisture indicator with 3% relative humidity sensitivity, intended for use on refrigerant lines.

Features/Benefits

3% relative humidity indication compared to 10% paper indicators
3% relative humidity sensitivity
Accurate color calibration at low ppm levels and higher temperatures
All brass corrosion resistant body
Fully hermetic design
Maximum working pressure: 680 psig
Single indicator for all common refrigerants
Solid copper fittings
Tri color coded: Blue/Purple/Pink
Wide angle viewing/ high visibility window for ease of monitoring

CAPACITOR, OVLD AND START, RLY, 1.66 A

Prevents low voltage starting problems
Replaces relay, overload and provides a boost for hard start and unbalanced systems
Wire designations - white/start, black/common, red/run

These black Mechanix Wear FastFit MFF-05 mechanics gloves are size large and are made with tricot, synthetic leather, and TrekDry. In addition, they have nylon stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a shirred slip-on cuff, and an EN 388 Rating of 2121X. They feature pull straps, reinforced thumb crotch, and touchscreen compatibility.

Harris® 3/16 in. x 12 ft. single-line acetylene R-Grade welding hose with A&A connections and (2) 3/8 in. - 24 LH swivel fittings is kink-proof with 8-sided crimped ferrules that can withstand a maximum working pressure of 200 psi. The hose is color-coded red for ease of identification.

Features
Standard duty single line welding hose for acetylene fuel gas ONLY.
3/16 in. x 12 ft., R-Grade, A&A connections with (2) 3/8 in. - 24 LH thread pattern.
Working pressure of 200 PSI max.
Hose is color coded red for acetylene gas service providing easy identification for quick and accurate installation and white ink brand markings along hose length to further prevent misidentification of intended use.
Non-sparking durable brass fittings attached with external ferrules provide full coverage and support of the fitting inserted into the hose.
Non-blooming black EPDM tube minimizes the migration of combustible waxes or plasticizers to the surface of the rubber
Multiple textile plies for strength and kink resistance
Cover reduces dragging friction and provides extra abrasive, heat, mild chemical, ozone and weather resistance.
Conforms to CGA E-1 standard for hoses

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)

Model 5090 is a one-piece acetylene tip for welding/brazing torches. This tip is manufactured using environmentally-friendly tellurium copper that has excellent machining properties resulting in a higher quality tip. It is precision drilled and swaged for more precise and consistent flames. Model 5090 uses a universal mixer for sizes 0-10 eliminating the expense of using a different mixer for every tip size. The tip has a metal-to-metal contact seat virtually eliminating the possibility of leaks and the need for thread sealants. Conveniently vacuum-packed for point-of-purchase display.

Features
Constructed of tellurium copper
Welding and brazing tip for use with acetylene
Metal-to-metal seat virtually eliminates leaks
Precision drilled and swaged for more precise and consistent flames
Excellent machining properties yields a higher quality tip
Uses Harris universal mixer sizes 0-10
Marked with Harris logo and tip size for easy identification
One year warranty
Conveniently packaged for point-of-purchase display

Hermetically designed moisture indicator with 3% relative humidity sensitivity, intended for use on refrigerant lines.

Features/Benefits

3% relative humidity indication compared to 10% paper indicators
3% relative humidity sensitivity
Accurate color calibration at low ppm levels and higher temperatures
All brass corrosion resistant body
Fully hermetic design
Maximum working pressure: 680 psig
Single indicator for all common refrigerants
Solid copper fittings
Tri color coded: Blue/Purple/Pink
Wide angle viewing/ high visibility window for ease of monitoring

CAPACITOR, OVLD AND START, RLY, 115V, 6.8A

Prevents low voltage starting problems
Replaces relay, overload and provides a boost for hard start and unbalanced systems
Wire designations - white/start, black/common, red/run

CAPACITOR, OVLD AND START, RLY, 230V

Prevents low voltage starting problems
Replaces relay, overload and provides a boost for hard start and unbalanced systems
Wire designations - white/start, black/common, red/run

Hermetically designed moisture indicator with 3% relative humidity sensitivity, intended for use on refrigerant lines.

Features/Benefits

3% relative humidity indication compared to 10% paper indicators
3% relative humidity sensitivity
Accurate color calibration at low ppm levels and higher temperatures
All brass corrosion resistant body
Fully hermetic design
Maximum working pressure: 680 psig
Single indicator for all common refrigerants
Solid copper fittings
Tri color coded: Blue/Purple/Pink
Wide angle viewing/ high visibility window for ease of monitoring

Hermetically designed moisture indicator with 3% relative humidity sensitivity, intended for use on refrigerant lines.

Features/Benefits

3% relative humidity indication compared to 10% paper indicators
3% relative humidity sensitivity
Accurate color calibration at low ppm levels and higher temperatures
All brass corrosion resistant body
Fully hermetic design
Maximum working pressure: 680 psig
Single indicator for all common refrigerants
Solid copper fittings
Tri color coded: Blue/Purple/Pink
Wide angle viewing/ high visibility window for ease of monitoring

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized