Oatey® PVC Heavy Duty Medium Set Clear Cement is recommended for use on all schedules and classes of PVC pipe and fitting up to 12 in. diameter with interference fit, up to 18 in. for non-pressure. Its thick formula fills gaps in large diameter pipe and fitting joints. Oatey products have earned the trust of plumbing professionals for over 100 years.

120 VAC Start relay for 1/20 HP to 1/3 HP compressors. Can be used on refrigeration systems with and without run capacitors. This is a direct replacement for most two terminal PTC relays.

RELAY, 120VAC, 1/20 TO 1/3 HP, 2,4

Direct replacement for numerous OEM's
Use OL series overloads with IC series, PO series and UR115
Direct Replacement Solid State Relays

Key Features:
• Lightweight (23.2 Lbs / 10.8 Kg)
• Compact, portable size (0.57 cu. ft.)
• 1 HP, variable speed, brushless DC motor
• 100 to 240VAC (50/60Hz) universal voltage
• In-line 1/2″, 3/8″,1/4″ hose connection ports
• Stores/operates in extreme temperatures
• Auto shut-off solenoid valve
• Analog vacuum gauge
• Large vertical oil sight glass
• Closed, hoist-type handle
• 15 Micron ultimate vacuum
• Quiet Operation

Key Features:
• Lightweight (19.1 Lbs / 8.6 Kg)
• Compact, portable size (0.48 cu. ft.)
• 1/2 HP, variable speed, brushless DC motor
• 100 to 240VAC (50/60Hz) universal voltage
• In-line 1/2″, 3/8″,1/4″ hose connection ports
• Stores/operates in extreme temperatures
• Auto shut-off solenoid valve
• Analog vacuum gauge
• Large vertical oil sight glass
• Closed, hoist-type handle
• 15 Micron ultimate vacuum
• Quiet Operation

Key Features:
• Lightweight (22.4 Lbs / 10.1 Kg)
• Compact, portable size (0.57 cu. ft.)
• 1 HP, variable speed, brushless DC motor
• 100 to 240VAC (50/60Hz) universal voltage
In-line 1/2″, 3/8″,1/4″ hose connection ports
Stores/operates in extreme temperatures
Auto shut-off solenoid valve
Analog vacuum gauge
Large vertical oil sight glass
Closed, hoist-type handle
15 Micron ultimate vacuum
Quiet Operation

DCL/DCB/DAS/DCR - Filter Driers
Danfoss lter driers function as simple drop-in replacements for most driers sold in the aftermarket or installed on equipment by
manufacturers. All Danfoss lter driers are constructed with a solid core design to maximize moisture removal while minimizing pressure
drop. These driers use a mixture of molecular sieve and activated alumina to both adsorb system moisture and capture acid and prevent
solid contaminants from entering the system. The Danfoss 1.5 cubic inch hermetic lter drier can be used in hydrocarbon systems to provide
exceptional protection while minimizing charge requirements.

Service kit (NC); diaphragm assembly, O-ring, (4) screws, armature assembly, rubber gasket, refrigeration gasket, compression spring

CONTACTOR, 24V, 30A, 3, 40A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

• 32 Total Exterior and Interior pockets
• 3 Stainless Steel Tape Clips
• Backside tablet pocket
• Magnetic screw catcher
• “Hang-up” hook
• Pass-through for hang up hook
• Over-molded rubber grip
• Padded shoulder strap
• YKK® zippers
• Waterproof Polypropylene plastic base
for moisture and abrasion protection
• Tablet pocket dimensions: 10"H x 9"W x 1"D
• 5-Year warranty

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screw
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)
Cap included on all Australia temperature controls. Optional for all other regions

These controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

NEMA 1 enclosure with non-conductive cover
Front-located captive cover screw
Large, easy-to-read scale plate
SUPER CAP® capillary protection system
Universal mounting and compact design
Screw terminals are raised and fully accessible for easy wiring
Laser-welded bellows for extended life
Heavy-duty plated steel frame
Suitable for R12, R22, and R502 applications

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)

The ETC-1122 Green Discharge Temperature Sensor is designed for accurate temperature measurement and control, offering high reliability and precision. Equivalent to Emerson / Copeland / CPC part numbers 501-1121 & 501-1122 and Parker, Micro Thermo Technologies™ part number 023-0073..

Heated vent port for walk-in cooler and freezer applications
Commercial quality features
• Heated vents prevent freeze-ups and reduce cooler condensation
• Two way valve unit allows air flow in dual directions and compensates
for expansion and contraction during refrigeration cycles
• 120V/23W
SPECIFICATIONS:
• All aluminum louver construction
• Lexan, self-extinguishing internal sleeve
• Textured aluminum finish
• 120V

• 46 interior and exterior tool pockets of various sizes
• 2 Storage bays – 4 Storage platforms
• Manifold gauge and hose storage pocket
• Padded EVA thermoformed, ergonomic back padding
• Waterproof base
• Quick release metal hasp allows easy access to rear storage bay
• YKK® interlocking zippers
• Interior Magnetic Screw Catcher

Two tools in one, a core wrench and thread chaser, complete with a core carrying case and six cores.

Features/Benefits

Carrying case can hold several additional cores if desired
Multi-use tool acts as cap for carrying case

Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt.The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.

Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration.
Cost and space savings by reducing size of pulleys, bearings, guards and mounts.

CONTACTOR, 120V, 30A, 3, 40A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

KVP/KVL/KVR/NRD/KVC/CPCE - Pressure Regulators
Danfoss has a variety of pressure regulators to control the low and
high pressure sides and efficient function of a refrigeration system
under varying load conditions.
Pressure regulators include:
• Evaporator Pressure Regulator (KVP)
• Crankcase Pressure Regulator (KVL)
• Condensing Pressure Regulator (KVR)
• Differential Pressure Regulator (NRD)
• Hot Gas Bypass Valves (KVC/CPCE)

Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt.The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.

Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration.
Cost and space savings by reducing size of pulleys, bearings, guards and mounts.

Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt.The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.

Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration.
Cost and space savings by reducing size of pulleys, bearings, guards and mounts.

• 46 available pockets
• V-SWAP™ removable tool pocket panel system
• Includes rear tablet pocket & 2 padded meter pockets
• “Hang-up” hook - accessible while open and closed
• Over-molded rubber grip
• Padded shoulder strap
• YKK® zippers
• Waterproof Polypropylene plastic base
• Tablet pocket dimensions: 11"H x 9"W x 1"D
• 5 year Limited Warranty

EVR Version 2 - Solenoid Valves
EVR Version 2 solenoid valves are direct or servo-operated solenoid valves for liquid, suction, and hot gas lines. They are suitable for all
refrigeration, freezing, and air conditioning applications and are compatible with fuorinated refrigerants. The valves can be delivered as
normally open or closed as well as with or without manual operation.

• 44 Interior & exterior
pockets of varying sizes
• Outside mounted stainless tape clip
• Electric tape strap
• YKK ® Locking Zippers
• Holds over 50 hand tools
• Waterproof base, 3mm polypropylene
• Extra wide padded
shoulder strap
• Over-molded ergonomic grip
• Light gray interior for
improved visibility

KVP/KVL/KVR/NRD/KVC/CPCE - Pressure Regulators
Danfoss has a variety of pressure regulators to control the low and
high pressure sides and efficient function of a refrigeration system
under varying load conditions.
Pressure regulators include:
• Evaporator Pressure Regulator (KVP)
• Crankcase Pressure Regulator (KVL)
• Condensing Pressure Regulator (KVR)
• Differential Pressure Regulator (NRD)
• Hot Gas Bypass Valves (KVC/CPCE)

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)