The SLS series of 1/2" bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design.

Features/Benefits

Auto and manual reset
CSA approved
UL® recognized


Terminals: 45° angle ¼"
Cut out temp ( °F): 150 °F
Cut in temp ( °F): 110 °F
Differential °: 40 °F

CPS HP6A Offers
This premium refrigerant charge hose is leak-proof 8-sided crimp superior hose construction with "double barrier protection".

Features

R-410A Compatible
Environment friendly nylon permeation barrier meets SAE J2196
Compatible with CFC, HCFC and HFC refrigerants & blends
Adjustable valve core depressor opens all out of tolerance Schraeder® valves
800psi working pressure; 4,000psi burst
All-weather flexibility and strength
Extra deep knurling on nuts for easy grip
1/4in SAE fittings with 45° bend on one end
Available with MicroSeal™ or ball valve fittings
Blow-off grooves channel refrigerant to prevent spray back

NITROGEN 80Ft Refill

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

Model 26-L high quality replacement flints for hand-held single ignitors. They are economically priced to work with most single flint lighters. The flint securely remains seated in the aluminum flint holder for longer service life. Produces up to 1500 ignitions. Packaged 5 per holder.

Features
Replacement flints for use with single flint ignitors/strikers
For use with Harris Ignitor - PN 9004486
Five single flint replacements provide generous life to its ignitor.
Flints seated in aluminum holder for longer service life
Economically priced for a great value
Ease installation into ignitor

120 Volt Gas Furnace Hot Surface Ignitor

Connection: Molex
Voltage: 120VAC

Model HA-3i Inferno® air-fuel quick connect swirl tip has a specially-designed insert that delivers reliable swirl combustion performance every time. It provides a consistently hotter flame that will engulf and wrap around the work-piece for maximum efficiency. It is constructed from thick and strong 304 stainless steel tube stock designed to be durable and long-lasting. The tip works and integrates with today's existing quick-connect air-fuel handles allowing contractors to simply and quickly connect to their existing torch handles using acetylene.

Features
Quick connect swirl tip with A-hose connections for brazing and soldering with air/acetylene
Constructed from thick and strong 304 stainless steel tube stock and brass for longer service life
The unique swirl combustion design provides a consistent, hotter flame that engulfs and wraps around the work-piece for maximum efficiency
Every tip is tested twice - once to ensure the perfect orifice and again to ensure the flame quality
The exacting manufacturing standards used to develop this tip ensures the optimal delivery of fuel gas resulting in the perfect flame
Designed to work and integrate with existing quick-connect air fuel handles for efficiency and increased productivity
Tips are configured to produce reliable and repeatable flame performance and are evaluated using thermal photography techniques
Use with air-fuel/acetylene
Marked with Harris logo and tip size for easy identification

This offset service wrench features a chrome finish and 3/16in, 1/4in, 5/16in and 3/8in offset square drives, plus a hex adapter.

HVAC Leak Stop + U/V Dye 2 oz. liquid (60 ml).
2 ounces liquid leak stop treats up to 6 tons.
Does not contain polymers, will not harm A/C system or components.
Additive package protects against future corrosion.
Compatible with all lubricants & refrigerants.

Flow Control A/C Flush Gun with Flash Flush Quart in Retail Box

CAPACITOR, START, 56 – 72 MFD, 220V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-7/16 in

The P70 and P170 Controls for high pressure applications are designed primarily for high pressure cut-out control, head-pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications.

GBC V2 - Ball Valves
Danfoss GBC ball valves are manually operated shut-off valves suitable for bi-directional low. The design, weld, and choice of the sealing
material enable these ball valves to meet the most demanding requirements and provide years of leak-free performance.

CAPACITOR, START, 340 – 408 MFD, 110V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-13/16 in

Single flint ignitor is made of stainless steel with a large square hood and strong metal frame. It is lightweight, economical and dependable. It is the most popular ignitor in the industry and features a generous flint with a rotating wear-resistant file. Powertorch® single flint ignitor with replacement flint. Packaged 10 ignitors per case. Replaceable flints sold separately - PN 9004484.

Features
Most popular ignitor in the industry
Large square hood and strong metal frame
Long-life ignitor
Generous flint and rotating wear-resistant file
Uses low cost replacement flints

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

* 1 Bit – 2 Tip System, Square (Rob.) + Phillips
* Impact Rated, Color Coded Sizes
* Hardened Tips, Magnetic Ends

KIT, O-RING, 7/16, 5/8, 7/8 & 1-3/8 IN

Includes a set of three of each of the most common size o-rings
Used in swivel and rotolock valve applications
Outside Diameter 9/16 in, 3/4 in, 1 in and 1-1/2 in
Inside Diameter 7/16 in, 5/8 in, 7/8 in and 1-3/8 in

This rectangular telescoping mirror is suitable for fast, accurate inspection of any hidden area. The universal ball joints hold the mirror firmly at any desired angle.

Universal line valves, two styles - a flared or straight end copper piece

Features/Benefits

Copper tee with the body brazed on
Flared Ends

Non-misting formulation.
Universal Synthetic Formula, compatible with most vacuum pump brands.
Contains conditioners, inhibitors & anti wear agents for lubricity & wear protection.
46 cSt viscosity.

KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits – allowing for maximum productivity and safety for you and your employees. With KleenGuard™ Nemesis™ Safety Glasses, you get sleek, modern eyewear with durable, lightweight construction. That is just one of the reason why millions of people wear them for protection both at work and at home. KleenGuard™ Nemesis™ Safety Glasses have polycarbonate lenses that provide 99.9% UVA/ UVB/UVC protection to help prevent eye damage like cataracts, retinal damage, and other conditions that can cause temporary vision loss. The wraparound frame has a base curve of 8 that extends the range of peripheral protection, as well as soft touch temples for comfort. KleenGuard™ Nemesis™ Safety Glasses have a patented nose piece designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose – all for long-term comfort. Each pair of KleenGuard™ Nemesis™ Safety Glasses come with a neck cord for securing them, so that the glasses are ready to protect at a moment's notice. The safety eyewear is manufactured to comply with the ANSI/ISEA Z87.1+ standard for personal eye protection. Both men and women will find these stylish glasses to be comfortable and functional for construction, manufacturing, gun shooting/shooting range, and a host of other industries. In addition, these safety glasses are recyclable through The RightCycle™ Program is the first manufacturer-led PPE recycling program. Remember: comfort and style drive compliance, so it pays to provide comfortable designer glasses that your staff will be proud to wear. Making the right Personal Protection choice is difficult. Perform with distinction with KleenGuard™ Personal Protective Equipment (PPE).

KleenGuard™ V30 Nemesis™ Safety Glasses; Blue Lenses with Mirror coating; Black Frame; Unisex Eyewear for Men and Women
Features a modern sleek and stylish lightweight design that your employees will be happy to wear; available in a variety of frame colors, lens colors and premium lens coatings for better performance and longer life
Polycarbonate lenses provide 99.9% UVA/UVB/UVC protection; meets the ANSI Z87.1+ standards
Designed to be extremely flexible, channel sweat away from the eyes, and help prevent slippage down the nose – all for long-term comfort
Recyclable through The RightCycle™ Program, the first manufacturer-led PPE recycling program.

* 1 Bit – 2 Tip System
* Impact Rated, Color Coded Sizes
* Hardened Tips, Magnetic Ends

VALVE, BULLET, PIERCING, ZNC, 1/4 IN, 1/4

Corrosion resistant
Hex key wrench included
Non-positional mounting, no adapter valve required
Patented valve gasket provides 50 times more sealing area than competitive 'O' ring types
Piercing needle is engineered for concentricity and hardness to insure perfect seating every time, requires only 2 in clearance for installation and operation

The SLS series of 1/2" bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design.

Features/Benefits

Auto reset
CSA approved
Offered in a broad temperature range to cover most heating applications
UL® recognized

One PHLiPBiT replaces 2 singles, reduces inventory, saves time & money. Drive more screws, faster & easier with less strip out.

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

3G – SUS 150 VISCOSITY (3GS EQUIVALENT).
Premium Quality.
Compatible with CFC, HCFC and Ammonia Refrigerants.
Low pour point and wax content.
High chemical and thermal stability.
30 cSt viscosity.