KPU - Pressure Switches
KPU pressure switches are designed to be contractor friendly and used in refrigeration and air-conditioning systems to protect the systems
from excessively low suction or high discharge pressure. They can also be applied to start and stop compressors and the fans of air-cooled
condensers. KPU pressure switches, in single and dual versions, cover a comprehensive range of applications and are designed for use with
Fluorinated and non-aggressive refrigerants. Most KPU pressure controls can be used with R-410a systems with only a few code numbers.

Temperature range: 0°f/80°f and -17°c/26°c
Great quality product
Wall bracket included for mounting
Model Number : 5636

Seal kit (NC); O-ring for armature tube, rubber gasket, O-ring for steel cover, support ring

0.183

This 2-valve manifold and gauge set has an anodized-aluminum block body with 1/4in SAE, 45° fittings and an extra access port in the center with a Schrader valve and hanging hook.

MaterialAluminum, Zinc coated steel ConstructionOne-piece; hubbed, hubless, or unit-bearing

Run capacitors for use in Mini Split applications.

Features/Benefits

Meets IEC 252 Standard
Plastic construction
Quad blade quick connect terminals
UL recognized

MaterialAluminum, Zinc coated steel ConstructionOne-piece; hubbed, hubless, or unit-bearing

MaterialAluminum, Zinc coated steel ConstructionOne-piece; hubbed, hubless, or unit-bearing

MaterialAluminum, Zinc coated steel ConstructionOne-piece; hubbed, hubless, or unit-bearing

The ETC-0030 is a 24V AC center-tapped transformer rated at 30VA, built to power 1–2 Multiflex boards such as the 16AI (810-3013), 8RO (810-3006), 8DO (810-3050), and 4AO (815-3030). Compatible with 115VAC and 230VAC primary inputs, it features a foot mount design and is UL approved for dependable performance in HVAC-R and energy management systems.

ULTRA FLUX
Product Overview

Ultra Flux is a low spattering water based active flux which is used in open air brazing for both ferrous and non-ferrous metals to promote oxide removal.
Premium grade
Low spattering
Good part adhesion
Made in USA
Industry Applications:
Low temperature silver braze alloys (1100F-1600F)

EVR Version 2 - Solenoid Valves
EVR Version 2 solenoid valves are direct or servo-operated solenoid valves for liquid, suction, and hot gas lines. They are suitable for all
refrigeration, freezing, and air conditioning applications and are compatible with fuorinated refrigerants. The valves can be delivered as
normally open or closed as well as with or without manual operation.

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

12-10 AWG insulated crimp type 15 Pieces

EVR Version 2 - Solenoid Valves
EVR Version 2 solenoid valves are direct or servo-operated solenoid valves for liquid, suction, and hot gas lines. They are suitable for all
refrigeration, freezing, and air conditioning applications and are compatible with fuorinated refrigerants. The valves can be delivered as
normally open or closed as well as with or without manual operation.

One PHLiPBiT replaces 2 singles, reduces inventory, saves time & money. Drive more screws, faster & easier with less strip out.

The ETC-1122 Green Discharge Temperature Sensor is designed for accurate temperature measurement and control, offering high reliability and precision. Equivalent to Emerson / Copeland / CPC part numbers 501-1121 & 501-1122 and Parker, Micro Thermo Technologies™ part number 023-0073..

One PHLiPBiT replaces 2 singles, reduces inventory, saves time & money. Drive more screws, faster & easier with less strip out.

The Robertshaw® 2374-510 Air Pressure Sensing Switch has a glass-filled polycarbonate housing containing a sensing diaphragm and an integral snap-acting switch with three male 90° quick-connect terminals. The switch can sense positive, negative or differential air pressure. The field adjustable set point range of this switch is 0.10” WC to 10.0” WC. Using the switch accessories contained in this kit, the switch can be applied to a wide variety of residential and light commercial HVAC applications.

2374-510 Kit Contents
Air pressure sensing switch
Calibration springs (5 options)
Orifice flows (4 options)
Mounting brackets (2 options)
Calibration tool (hex wrench)

Exact replacement silicon nitride flat igniter kit with bracket, connector and high temperature wire nuts.

Features:

Superior gas lighting ability
Lower power consumption
Faster time to temperature response
Higher resistance to oxidation


Specifications:

Maximum Temperature: 2732°F / 1500°C @ 132 VAC
Minimum Temperature: 2192°F / 1200°C @ 98 VAC
Time to Temperature (1800°F): < 17 seconds @ 120 +/- 1.0 VAC
Voltage: 120 VAC
Steady State Current: 0.8 - 2 amps @ 120 VAC
Cold Resistance: 34-64 Ohms @ 75°F, +/- 10°F

One PHLiPBiT replaces 2 singles, reduces inventory, saves time & money. Drive more screws, faster & easier with less strip out.

The ETC-200-E Pressure Transducer is a high-accuracy, durable sensor for HVAC and refrigeration systems. Compatible with CPC, Emerson, Copeland, and Danfoss systems including RMCC, E2, E2e, E3, AK-SC255, AK-SC355, AK-SM800, and AK-SM800a. Equivalent to Danfoss 060G3990 and CPC part number 800-2200.

Note: supplied with 2M Cable

Service kit (NC); diaphragm assembly, O-ring, (4) screws, armature assembly, rubber gasket, support ring, compression ring