This blue hose features all-weather flexibility and strength.

The SRL series of 1/2" bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design.

Features/Benefits

CSA approved
Manual reset
UL® recognized
Uses 36T electrical ratings

Terminals: Vertical ¼"
Cut out temp ( °F): 300 °F
Cut in temp ( °F): Manual

CU CC SCRL 5.5HP 208-230/3/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10.0 °F
Voltage : 208-230/3/60
Application Capacity* : 20,680 BTU/H
Refrigerant Type : R448A
AWEF Value : 3.15

CU CC SCRL 4.5HP 208-230/1/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/1/60
Application Capacity* : 33,920 BTU/H
Refrigerant Type : R448A
AWEF Value : 7.6

Direct replacement silicon nitride igniter kit

Features/Benefits

18 gauge copper high temperature fiberglass insulated lead wires
Exact replacement hot surface igniter
Faster time to temperature response
Higher resistance to oxidation
Longer usable life
Lower power consumption
More robust in transit
Stronger more durable design

Time to Temperature: <17 seconds @ 120 +/- 1.0 VAC
Resistance: 34 - 64 Ohms
Minimum Temperature: 2192°F / 1200°C @ 98 Volts
Maximum Temperature: 2732°F / 1500°C @ 132 Volts
Steady State Current: 0.8 to 2.0 Amps Maximum @ 120 Volts
Igniter Material: Silicon Nitride

CU CC SCRL 10.0HP 575/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 575/3/60
Application Capacity* : 104,740 BTU/H
Refrigerant Type : R448A
AWEF Value : 7.6

This jaw gear pulley features a patented design that enables fast configuration of 2 or 3 puller arms for inward or outward gripping positions.

The Ranco® Varifix International Cold Controls are designed for fast and easy service replacements. They are available for both refrigerator and freezer applications.

Features and Benefits

Trusted brand
Capillary is crimped and sealed for maximum reliability
High level of performance
Complete kit includes all necessary hardware

Finds leaks quickly & easily.
Solvent free, safe for all refrigerantion systems and equipment.
Compatible with all lubricants and refrigerants.
Anti-wear agents and friction modifiers enhance compressor and A/C system efficiency while reducing compressor wear.
Anti-oxidants protect system against formation of sludge & other deposits.

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

LITH-EASE is a high-quality, multi-purpose grease for automotive, marine, shop, farm and home use. Manufactured from the highest quality lithium soap, and produced with '12 Hydroxy' hydrogenated castor oil which contributes to the smooth consistency.

Features/Benefits

Excellent water resistance
Long Lasting
Minimal oil separation
Superior performance
Wide temperature range

Premium grade, fully certified silicone adhesive sealant outperforms cheap hardware store brands
Waterproof adhesive bonds better than generic sealants; won’t peel, reduces service call-backs for leaks
Air-cures overnight; tack-free in 15 min
Standard and high temperature formulas
Meets Federal and NSF standards for food service use

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

12-10 AWG ¼" (.250") Female Tab 15 Pieces

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

16-14 AWG ¼" stud 17/64" I.D. 15 Pieces

40 PPM methane sensitivity, detects combustible gases including: Methane, Butane, Propane, Gasoline, Diesel and Kerosene. Tick rate can be nullified to eliminate background gas concentration and pinpoint the leak source.

40ppm methane sensitivity and bearing defects
Trace natural gas lines and fittings for leaks frame to failure
Check gas equipment for leaks
Test propane tanks, fittings, lines, and heaters for leaks
Check propane tanks, fitting lines, and heaters for leaks
Test confined spaces for gas build-up

Line Service Valve 3/16" Copper Tubing, Wrench Cap and Core

Features/Benefits

3/16" Copper Tubing
Made of CDA 360 brass
Wrench Cap and Core

Dry wipe,
Dispenser Box,
Super Heavy Absorbency,
Good Wet Strength

Differential Manometer grouped together with T Fittings, Static Tips, Tubing and a carrying case.

Features

Dual input with ±120" H2O range
0.001" H2O maximum resolution
Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
Display – 4 digit with backlight
Smooth – Stabilizes display when measuring fluctuating pressures

These black Mechanix Wear FastFit MFF-05 mechanics gloves are size XX-large and are made with tricot, synthetic leather, and TrekDry. In addition, they have nylon stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a shirred slip-on cuff, and an EN 388 Rating of 2121X. They feature pull straps, reinforced thumb crotch, and touchscreen compatibility.

CONTACTOR,2 PL,10-32 SCREWS,30A,120V,20A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room

Key Features:
• Lightweight (23.2 Lbs / 10.8 Kg)
• Compact, portable size (0.57 cu. ft.)
• 1 HP, variable speed, brushless DC motor
• 100 to 240VAC (50/60Hz) universal voltage
• In-line 1/2″, 3/8″,1/4″ hose connection ports
• Stores/operates in extreme temperatures
• Auto shut-off solenoid valve
• Analog vacuum gauge
• Large vertical oil sight glass
• Closed, hoist-type handle
• 15 Micron ultimate vacuum
• Quiet Operation

CU CC SCRL 4.5HP 208-230/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25.0 °F
Voltage : 208-230/3/60
Application Capacity* : 33,920 BTU/H
Refrigerant Type : R448A
AWEF Value : 7.6"

CU CC SCRL 0.8HP 208-230/1/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10 °F
Voltage : 208-230/1/60
Application Capacity* : 5,280 BTU/H
Refrigerant Type : R404A
AWEF Value : N/A

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

Time Delay on Make Timers (DOM)

Features/Benefits

1/4" male quick connect terminals
Adjustable time delay on make 6 seconds to 8 minutes
Cut the jumper wire to use in 110/250 volts
Delay on Make Timer (DOM)

UC C LP AIR SF 115 1PH M STD S 1
Evap. Temp : 25 °F Mid. Temp
Voltage : 115/1/60

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

¼" (.250") x #10 stud 10 Pieces