KPU 19 - Thermostats
The KPU 19 thermostats are designed for easy installation and service with bottom and rear knockouts, differential adjustment dial,
a tamper-resistant design, and a robust thermoplastic housing.

The J10 Series Humidistats and Dehumidistats are designed to regulate the relative humidity of confined spaces by cycling humidifying or dehumidifying equipment. Designed for central systems, the J10 controls are made from high impact plastic with a brushed finish dial plate. The J10's nylon sensing element provides long life and accurate humidity control. The J10-821 humidistat can be wall mounted or installed directly in a cold air return duct.

Features and Benefits

Strong plastic frame with integral switch eliminates the need to ground the control
Improved woven nylon sensing element provides a faster response time
Greater stability in set points over dramatic changes in relative humidity
Improved differential allowing 5% relative humidity

Bolt-type tongue provides positive locking action
Proven, heavy-duty construction outlasts similar latches in hard commercial use
Adjustable strike assures precise adjustment
Padlocking provision standard on all models
Accepts Kason inside release lever to prevent accidental entrapment in locked walk-ins
Inside lever releases cylinder-locked or padlocked door
Unsurpassed for long life and reliability
Inside release sold separately

The Ranco® A12 and 9531 Series Constant Cut-in Temperature Controls are designed to switch electrical components of refrigeration systems in response to sensed temperatures.

Features and Benefits

Laser-welded stainless steel bellows
Fixed or adjustable temperature settings
High-amperage contacts
Pneumatic action provided by vapor-filled capillary or capillary with bulb sensing elements
Constant On or Off positions available
Choice of mounting brackets, adjustment ranges and cams, and slotted or flatted shafts
Standard 1/4” quick-connect terminals with optional screw terminals

The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

Controls available for most refrigerant types
High-amp rated switch (SPST) design (O10-1402/O10-1483)
Super Cap® capillary vibration protection system
Non-conductive front cover with captive screw
Adjustable differential and range
Easy-to-read scale plate
Vibration cone (absorbs and reduces vibration away from brazed joint)
Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)
The O16-624 control has additional features:

Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A

This mini tube cutter features patented Set and Cut technology that provides easy tube cutting with little or no readjustment required.
Mini Tube Cutter 1/8″ to 7/8″

The Paragon® 8000 Series Commercial Defrost Controls are designed for commercial freezers and refrigerators to provide automatic defrost capability. They accommodate various types of defrost systems including electric defrost heaters, hot gas, and compressor off cycle.

Features and Benefits

Time initiated; temperature, pressure or time terminated models available
High-amp switch contacts: 40 Amps, 2 HP
Positive slider bar switch design assures positive electrical contact and wipes the contact surface of contaminates
Temperature or pressure terminated models are designed for defrost termination using an external temperature or pressure device
Safety back-up - mechanical time-driven defrost termination
Heavy-duty synchronous design drive motor
Choice of three contact arrangements
Adjustable frequency of defrost initiation from 1 to 6 cycles per day with a minimum of 4 hours between successive operations
Adjustable back-up defrost termination from 4 to 110 minutes in 2 minute increments
Heavy-duty steel enclosure with knockouts (on the bottom, back and sides) and hasp and staple padlock
All 8240 models have an adjustable cut-in pressure dial calibrated from 36-110 pounds for R12, R22, R502

The Ranco® A12 and 9531 Series Constant Cut-in Temperature Controls are designed to switch electrical components of refrigeration systems in response to sensed temperatures.

Features and Benefits

Laser-welded stainless steel bellows
Fixed or adjustable temperature settings
High-amperage contacts
Pneumatic action provided by vapor-filled capillary or capillary with bulb sensing elements
Constant On or Off positions available
Choice of mounting brackets, adjustment ranges and cams, and slotted or flatted shafts
Standard 1/4” quick-connect terminals with optional screw terminals

This ratchet tube cutter features patented Set and Cut technology that provides easy tube cutting with little or no readjustment required.

The Ranco® A12 and 9531 Series Constant Cut-in Temperature Controls are designed to switch electrical components of refrigeration systems in response to sensed temperatures.

Features and Benefits

Laser-welded stainless steel bellows
Fixed or adjustable temperature settings
High-amperage contacts
Pneumatic action provided by vapor-filled capillary or capillary with bulb sensing elements
Constant On or Off positions available
Choice of mounting brackets, adjustment ranges and cams, and slotted or flatted shafts
Standard 1/4” quick-connect terminals with optional screw terminals

PHLiPBiT™ solves the frustrating problem of driving or removing Square or Phillips screws on a common project. They combined the most popular tips & created a fully featured dual drive “Flip-&-Go” power bit.

1 Bit – 2 Tip System offers quick release convenience and industry leading benefits. Designed and strengthened with industrial grade tool steel, TruTorq hardened tips, precision recess contact, magnetic ends & torsion control zone. Impact rated heritage provides toughness, durability & maximum drive life with less strip out. Color coded body, laser etched ID markings. 1/4″ hex shank fits all impact drive machines and their Q/R Uni-Collet.

One PHLiPBiT replaces 2 singles, reduces inventory, saves time, money, produces frustration free, rapid load screw driving.

The Paragon® 8000 Series Commercial Defrost Controls are designed for commercial freezers and refrigerators to provide automatic defrost capability. They accommodate various types of defrost systems including electric defrost heaters, hot gas, and compressor off cycle.

Features and Benefits

Time initiated; temperature, pressure or time terminated models available
High-amp switch contacts: 40 Amps, 2 HP
Positive slider bar switch design assures positive electrical contact and wipes the contact surface of contaminates
Temperature or pressure terminated models are designed for defrost termination using an external temperature or pressure device
Safety back-up - mechanical time-driven defrost termination
Heavy-duty synchronous design drive motor
Choice of three contact arrangements
Adjustable frequency of defrost initiation from 1 to 6 cycles per day with a minimum of 4 hours between successive operations
Adjustable back-up defrost termination from 4 to 110 minutes in 2 minute increments
Heavy-duty steel enclosure with knockouts (on the bottom, back and sides) and hasp and staple padlock
All 8240 models have an adjustable cut-in pressure dial calibrated from 36-110 pounds for R12, R22, R502

These black disposable Grease Monkey gloves protect hands for brief exposure periods. They are powder-free, their thickness is eight mils and they are 11 inches long. Their size is medium, and they come in a pack of 50 to be used in clinics and other settings.

Brass tank adaptor connects a cylinder to a regulator. For CGA 520 "B" acetylene to CGA 200 "MC acetylene connections. Adaptors should not be used for permanent installations.

Features
Brass construction
Connects "B" acetylene tank to MC acetylene regulator
For use with acetylene

Keep hands protected with these black disposable Grease Monkey gloves. They are powder-free, they have an eight mil thickness, are 11 inches long, and size large. These gloves come in a pack of 50 and are ideal for clinics and some industrial settings.

This tube cutter features a quick-release pin for fast replacement of cutting wheels.

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)

This premium hose features all-weather flexibility and strength and comes in pack of 3 with a 5ft (150cm) measurement.

Features:

Attacks Corrosion: Frees bolts, fasteners and other mechanical components
Removes Rust and Carbon Deposits: Will not attack or damage metal
Penetrates Faster: Penetrates quicker and deeper than similar products
Works Everywhere: Use on any corroded threads or tight parts
Simplifies Repairs: Makes the toughest maintenance jobs easier, faster and safer to execute.
Penetrates Deeper: Penetrates the smallest spaces, threads and openings
Details:

Loosen frozen metal parts the professional way, with Kroil original penetrant in liquid and aerosol (formerly Aero Kroil) formulas. Discover why this is the best penetrating oil to loosen bolts in various applications. When it comes to freeing corroded items in tough spaces, nothing rivals powerful, industry-proven Kroil penetrating oil. Used and trusted by pros and experienced DIYers alike since 1939, Kroil quickly loosens rusted nuts and bolts, frees frozen shafts, pulleys, and more. No space is too tight to reach, thanks to Kroil's ability to penetrate the smallest opening, thread or crevice. Corrosion meets its match, as Kroil removes and prevents rust, cleans and lubricates, and displaces moisture.

Assess food and non-food liquid, air and surfaces using this TPI GK13M FEP Insulated Beaded Tip Probe, which has a 48" lead. This probe works in temperatures ranging from -165 to 400°F (-110 to 204°C) and has a sub-mini connector.

Features

Crafted with PTFE insulation material
Temperature range is -165 to 400°F (-110 to 204°C)
Beaded tip
Sub-mini connector
48" (1.2 m) lead
24 gauge diameter
Exposed junction for fast response in food and non-food liquid, air and surface applications