Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

22-18 AWG insulated - red 20 Pieces

CONTACTOR, 120V, 30A, 3, 40A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

CONTACTOR, 24V, 25A, 3, 35A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

¼" Male Flare, ⅜" ODS, ½" ODF w/ Cap Wrench & Core

Features/Benefits

¼" SAE Male Flare
Brass cap with Neoprene O-ring
Stainless steel valve core, suitable for all refrigerants

RL 32-3MAF APPROVED FOR COPELAND® BRAND PRODUCTS.
Formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants.
Polyol Ester (POE) lubricant for use with R32, R-134a, R-404A, R407C, R410A, R-448A, R-449A, R507; HCFC, HFO & blends, and Natural Refrigerants – CO2 and Hydrocarbons.
Excellent thermal and chemical stability and is compatible with a wide range of elastomers, polymeric materials and other materials of construction.
Provides effective wear protection for steel and aluminum surfaces for increased system life & efficiency.
Compatible with mineral oils, alkylbenzenes and PAG’s.
33 cSt viscosity.

CONNECTOR,END,CLOSED,12-10 AWG,100 PC

12-10 AWG insulated crimp type 100 pieces

START, HARD, 170 TO 277V, 1/3 TO 2 HP

Backup electronic timing circuit to protect the compressor
Can be used on PSC and CSIR type compressors
Easy 2-wire installation
Electronic potential relay (EPR) technology, Instant re-start, voltage sensing
NATE recognized (course #1867-0002)

This replacement technology sensor is made to work with LS1 and LS2 electronic leak detectors.

CONTACTOR, 240V, 30A, 1.5, 40A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

Model HSLT604HD air-fuel hand torch provides high performance and convenience to professional heating, ventilation, air conditioning, plumbing and refrigeration contractors. Built with heating performance, temperature consistency and flame control in mind, a Harris hand torch is the perfect partner for demanding brazing and soldering applications. This heavy-duty trigger torch is for use with MAP-Pro™ and Propane.

Features
Piezo igniter for instant flame
Red plastic ignition button lock for continuous use
Swirl combustion tip
Ergonomic handle design
Brass flame adjusting knob
Heavy-duty construction
For use with MAP-Pro™ and Propane 14.1 oz. non-refillable cylinders
Three year warranty
Conveniently packaged in clamshell for point-of-purchase display

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp, up to 6.8 Amps.
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

A practical leak management package designed for HVAC-R service professionals.

Includes:
• HS11001 Leak Lock Gold – Premium refrigerant-grade thread sealant
• HVAC Leak Stop Syringe – Internal leak repair solution for minor refrigerant leaks

Benefits:
• Helps reduce refrigerant loss
• Fast and easy application
• Excellent addition to any technician's toolbox
• Suitable for service and maintenance work

CONTACTOR, 240V, 25A, 1.5, 35A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

CU BN SCRL 7.5HP 208-230/3/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10.0 °F
Voltage : 208-230/3/60
Application Capacity* : 31,350 BTU/H
Refrigerant Type : R448A
AWEF Value : 3.15

CU CC SCRL 5.0HP 208-230/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/3/60
Application Capacity* : 37,130 BTU/H
Refrigerant Type : R448A
AWEF Value : 7.6

VALVE, BULLET, PIERCING, ZNC, 3/8 IN, 12/BX

Corrosion resistant
Hex key wrench included
Non-positional mounting, no adapter valve required
Patented valve gasket provides 50 times more sealing area than competitive 'O' ring types
Piercing needle is engineered for concentricity and hardness to insure perfect seating every time, requires only 2 in clearance for installation and operation

WALK-IN FREEZER DOOR - 4" THICK
34" X 78" / 3LH 3RH SWING / 'L' FRAME
WITH BACKING, HARDWARE, DOOR CLOSER, KASON HINGES, &
ALUM CHECKER PLATE ON EXTERIOR ONLY
FOR 4" FLOOR / 4" WAL

CONTACTOR, 24V ,30A, 2, 40A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

¼" x 3" Tube, expanded to ¼" ID on one side, ¼" Male Flare w/ Cap Wrench & Core

Features/Benefits

¼" SAE Male Flare
Brass cap with Neoprene O-ring
Stainless steel valve core, suitable for all refrigerants

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

CU CC SCRL 2.0HP 208-230/3/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10 °F
Voltage : 208-230/3/60
Application Capacity* : 9,310 BTU/H
Refrigerant Type : R404A
AWEF Value : 3.09

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.

This sight glass tool slides easily into the notches of a scroll compressor sight glass, and easily helps to extract the sight glass with a crescent or socket wrench. 1” diameter.

Features/Benefits

Extension slides into outer slots on 1 inch diameter sight glasses
Made of heavy-duty carbon steel
Once inserted use wrench or socket to remove the threaded sight glass

This 3/8in spring-type tube bender works for soft copper and aluminum. The end bell design aids in quick tubing removal.

MAP-Pro™ 14.1 oz. hand torch cylinder contains premium fuel suited for a variety of job site projects. MAP-Pro works faster and more efficiently with a higher burn temperature than standard propane. This tank works well with Harris' air-fuel hand torches.

Features
Provides maximum heat output and transfer for more efficient use
Faster soldering times than Harris' propane cylinders
Flame temperature in air of 3730 degrees F (2054 degrees C)
Constructed of durable steel
Slim and lightweight cylinder is easy to grip and maneuver
250 PSI operating pressure
Use with Harris air-fuel hand torches
One year warranty

(Dripless for Silicone and Caulking only)

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

¼" (.250") Female QC X #6 Screw 10 Pieces

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

12-10 AWG #10 stud 13/64" I.D. 15 Pieces