SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

Constructed with a thermoplastic polymer inner tube and cover to eliminate the vibration failures of copper capillary tube installations. Features a higher temperature rating thermoplastic (to 266°F) to eliminate failures caused by maximum load conditions.

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

16-14 AWG ¼" (.250") Female Tab 20 Pieces

Line service valve ¼" copper tubing, wrench cap and core

Features/Benefits

¼" Copper Tubing
Made of CDA 360 brass
Wrench Cap and Core

CU CC SCRL 2.7HP 208-230/1/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/1/60
Application Capacity* : 27,360 BTU/H
Refrigerant Type : R404A
AWEF Value : 7.6

CU CC SCRL 4.5HP 208-230/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25.0 °F
Voltage : 208-230/3/60
Application Capacity* : 33,920 BTU/H
Refrigerant Type : R448A
AWEF Value : 7.6"

CU CC SCRL 2.5HP 208-230/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/3/60
Application Capacity* : 22,860 BTU/H
Refrigerant Type : R404A
AWEF Value : 7.6

This 5/8in spring-type tube bender works for soft copper and aluminum. The end bell design aids in quick tubing removal.

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

12-10 AWG #10 stud 13/64" I.D. 100 Pieces

SUPCO® Cooper Driers are high quality, high capacity original equipment components for use on domestic and commercial refrigerators, freezers, and air conditioners.

Features/Benefits

100% XH-9 Beaded Molecular Sieve
Compatible with all refrigerants (including R290 & R600A)
Copper shells and end tubes
Easy break off grooved ends
Hermetically sealed
High capacity

This plastic holding razor blade scraper is designed with a high-quality ergonomic rubber grip, making it perfect for scraping hard to remove substances. The screw locks and holds the blade stably.

Features/Benefits

Ergonomic Grip
Thumbscrew blade lock
Uses standard straight edge blades

This premium hose with a 45° ball valve controls the flow of refrigerant with just a quarter-turn.

CONTACTOR, 3 PL, BX LUG, 90A, 120V, 75A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

This die-cast metal reaming and de-burring tool removes burrs from both the inside and outside edges of tubes. It's ergonomically shaped to fit comfortably in your hand.

CU CC SCRL 0.8HP 208-230/1/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10 °F
Voltage : 208-230/1/60
Application Capacity* : 5,280 BTU/H
Refrigerant Type : R404A
AWEF Value : N/A

Dry wipe,
Dispenser Box,
Super Heavy Absorbency,
Good Wet Strength

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

22-18 AWG ¼" (.250") Female Tab 20 Pieces

This DOT-approved 50lb (22.68kg) recovery tank features a 1/4in SAE male fitting, a maximum pressure rating of 400psig and a water capacity of 47.7lbs (21.7kg).

This manifold and gauge set features triple-seal piston valves and sure-grip rubber over metal valve handles.

VALVE, BULLET ,PIERCING, ZNC, 1/4 IN, 12/BX

Corrosion resistant
Hex key wrench included
Non-positional mounting, no adapter valve required
Patented valve gasket provides 50 times more sealing area than competitive 'O' ring types
Piercing needle is engineered for concentricity and hardness to insure perfect seating every time, requires only 2 in clearance for installation and operation

Premium grade, fully certified silicone adhesive sealant outperforms cheap hardware store brands
Waterproof adhesive bonds better than generic sealants; won’t peel, reduces service call-backs for leaks
Air-cures overnight; tack-free in 15 min
Standard and high temperature formulas
Meets Federal and NSF standards for food service use

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

16-14 AWG #10 stud 13/64" I.D. 20 Pieces

This heavy-duty vacuum and charging hose features a 460psi working pressure and measures 70.87in (180cm).

CONTACTOR, 3 PL, BX LUG, 120A, 240V, 90A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

(Dripless for Silicone and Caulking only)

Tee connector with depressor tip and one valve core along the straight length, and an additional valve core at a 90° angle.

Features/Benefits

1/4" nut on depressor tip
Two 1/4" male flare ends with valve core

¼" Male Flare X ¼" Female Flare Knurled Swivel w/ Depressor Tip & seal

Features/Benefits

¼" Female Knurled Swivel
¼" SAE Male Flare
Depressor Tip and Seal

This premium hose features a 5ft (150cm) length and a 45° ball valve.