The ETC-0030 is a 24V AC center-tapped transformer rated at 30VA, built to power 1–2 Multiflex boards such as the 16AI (810-3013), 8RO (810-3006), 8DO (810-3050), and 4AO (815-3030). Compatible with 115VAC and 230VAC primary inputs, it features a foot mount design and is UL approved for dependable performance in HVAC-R and energy management systems.

This electronic refrigerant leak detector features optimal leak-finding performance under a broad range of conditions and features fully automatic sensitivity selection and control.

Universal flat silicon carbide igniter kit. Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters

SENSOR, FLAME, SILICON CRBD, 1800°F, 3100°F

18 ga copper high temperature fiberglass insulated lead wires
Faster time to temperature response, higher resistance to oxidation
Longer usable life, lower power consumption, more robust in transit, stronger more durable design
Supco flat igniters offer an efficient , stronger, reliable hot surface silicon carbide design, superior gas lighting ability

Universal flat silicon carbide igniter kit. Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters

SENSOR, FLAME, SILICON CRBD, 1800°F, 3100°F

18 ga copper high temperature fiberglass insulated lead wires
Faster time to temperature response, higher resistance to oxidation
Longer usable life, lower power consumption, more robust in transit, stronger more durable design
Supco flat igniters offer an efficient , stronger, reliable hot surface silicon carbide design, superior gas lighting ability
Universal kit that replaces all Robertshaw igniters part numbers to minimize inventory

Model HSLT604HD air-fuel hand torch provides high performance and convenience to professional heating, ventilation, air conditioning, plumbing and refrigeration contractors. Built with heating performance, temperature consistency and flame control in mind, a Harris hand torch is the perfect partner for demanding brazing and soldering applications. This heavy-duty trigger torch is for use with MAP-Pro™ and Propane.

Features
Piezo igniter for instant flame
Red plastic ignition button lock for continuous use
Swirl combustion tip
Ergonomic handle design
Brass flame adjusting knob
Heavy-duty construction
For use with MAP-Pro™ and Propane 14.1 oz. non-refillable cylinders
Three year warranty
Conveniently packaged in clamshell for point-of-purchase display

Non-misting formulation.
Universal Synthetic Formula, compatible with most vacuum pump brands.
Contains conditioners, inhibitors & anti wear agents for lubricity & wear protection.
46 cSt viscosity.

Robertshaw® offers direct replacements for several leading OEM brands. These ignitors are constructed with sturdy, long-lasting silicon nitride for maximum longevity. The Robertshaw 41-429N is a 120V Direct Replacement for York S-102545231000 with a 4.28 inch wire length and 1.46 inch insulator.

CONTACTOR, 3 PL, BX LUG, 75A, 24V, 60A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

RS8000 Pro-Series Non-Programmable Wall Thermostat
Contractors can offer owners easy, yet powerful and reliable two-stage heating and one-stage cooling control in a simple, modern design with the RS8210 non-programmable wall thermostat.
Multi-Stage - 2 Heat / 1 Cool

• Large terminal blocks for easy installation
• Universal sub-base
• Quick access menu button
• Contractor/technician setup menu Simple, yet powerful control.
• Large, easy-to-read 4.6-square-inch blue backlit display
• 24V AC Powered OR Battery Operation (Included)
• 6Year Limited Warranty
• Easy-access front-load battery compartment
• Adjustable temperature differential (swing) for energy optimization and maximum system life
• Adjustable room temperature calibration
• Adjustable setpoint limits
• Filter change reminder
• Five-minute selectable on/off compressor delay protection for short-cycling prevention
• Separate O and B terminals

Use the TPI A776 Static Tip for Manometers to measure static pressure. A built-in magnet allows for placement inside of ductwork, so long as you have access through a 0.25" (6.35 mm) hole.

Features

Works with TPI manometers and combustion analyzers with built-in manometers (each sold separately)
Use to measure static pressure
Built-in magnet allows you to secure the static tip inside ductwork (requires a 0.25" hole)

CU CC SCRL 6.0HP 208-230/3/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10.0 °F
Voltage : 208-230/3/60
Application Capacity* : 24,330 BTU/H
Refrigerant Type : R448A
AWEF Value : 3.15

CONTACTOR, 3 PL, BX LUG, 120A, 120V, 90A

Complete competitive cross-reference available
Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

Temperature range: 0°f/80°f and -17°c/26°c
Great quality product
Wall bracket included for mounting
Model Number : 5636

Model B15-3HV is an E-equal or positive pressure mixer for light-duty brazing and welding with all fuel gases. This model has a mixer-to-tip tube thread size of 5/16 in. - 27. Its welding capacity is 1/2 in. (12.7mm) plate and it heats up to 60,000 BTU. Typical applications include metal art, maintenance, production brazing, etc. Conveniently vacuum-packed for point-of-purchase display.

Features
Brass light-duty mixer
E-equal or positive pressure mixer
For use with all fuel gases
5/16 in. - 27 mixer-to-tip tube thread size
Thread sealants not required when used with genuine Harris mixers
Welds up to 1/2 in. (12.7mm) plate;Heats up to 60,000 BTU
Typical applications include metal art, maintenance, production brazing, etc.
Engraved with model number for easy identification

CU CC SCRL 2.7HP 208-230/1/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/1/60
Application Capacity* : 27,360 BTU/H
Refrigerant Type : R404A
AWEF Value : 7.6

WALK-IN COOLER DOOR - 4" THICK
34" X 78" / 3LH 3RH SWING / 'L' FRAME
WITH BACKING, HARDWARE, DOOR CLOSER, KASON HINGES, &
ALUM CHECKER PLATE ON EXTERIOR ONLY
FOR NO FLOOR / 4" WALL

CU CC SCRL 2.5HP 208-230/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/3/60
Application Capacity* : 22,860 BTU/H
Refrigerant Type : R404A
AWEF Value : 7.6

The ETC-0080 is a high-capacity center-tapped transformer rated at 100VA, delivering a stable 24V AC output. Compatible with 120V, 208V, and 240V AC primary inputs, it is designed to power up to four HVAC-R or EMS control boards. CL2 rated for safe installation and performance. Direct replacement for Emerson 640-0080.

CONTACTOR, 3 PL, BX LUG, 120A, 24V, 90A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

WALK-IN FREEZER DOOR - 4" THICK
34" X 78" / 3LH 3RH SWING / 'L' FRAME
WITH BACKING, HARDWARE, DOOR CLOSER, KASON HINGES, &
ALUM CHECKER PLATE ON EXTERIOR ONLY
FOR 4" FLOOR / 4" WAL

CONTACTOR, 3 PL, BX LUG, 50A, 480V, 40A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

Model Inferno® kit with HA-5i and HA-14i heating tips contains all the quality equipment needed for brazing, and soldering using acetylene gas. The kit can braze up to 5 in. (127.00mm) diameter copper tube and is supplied with a size tip for brazing copper up to 3 in. (76.20mm) tube. The kit can solder up to 6 in. (152.40mm) diameter copper tube and is supplied with a size tip for soldering copper up to 5 in. (127.00mm) tube.

Features
Kit for brazing and soldering using air acetylene gas with quick connect Inferno® tip interchangeability.
Acetylene regulator model 601 with 50mm dual scale plastic gauges, notched adjusting knob and our distinguished internal encapsulated seat filter. The regulator delivers up 15 psi.
Handle HQB-4 is ergonomically designed with a super tough grip for balance and comfort. This handle features quick connectivity for ease of desired heat output
Consumables included: Heating tips HA-5i and HA-14i made of 304 stainless steel utilizing swirl combustion technology.
Accessories included: Shade 5 safety glasses (ANSI Z87.1 CE Weld), Handheld ignitor, 3/16 in. x 12 ft. AxA single T-grade hose, and chrome acetylene cylinder wrench
Crossover PN : (T)0386-0336, (G)89628
The quality designed Inferno® tips deliver reliable heat, consistent temperature and a quality flame
Regulator has seven year warranty and other components have one year warranty
Conveniently packaged in clamshell for point-of-purchase display

MAP-Pro™ 14.1 oz. hand torch cylinder contains premium fuel suited for a variety of job site projects. MAP-Pro works faster and more efficiently with a higher burn temperature than standard propane. This tank works well with Harris' air-fuel hand torches.

Features
Provides maximum heat output and transfer for more efficient use
Faster soldering times than Harris' propane cylinders
Flame temperature in air of 3730 degrees F (2054 degrees C)
Constructed of durable steel
Slim and lightweight cylinder is easy to grip and maneuver
250 PSI operating pressure
Use with Harris air-fuel hand torches
One year warranty

Robertshaw® offers direct replacements for several leading OEM brands. These ignitors are constructed with sturdy, long-lasting silicon nitride for maximum longevity. The Robertshaw 41-430N is a 120V Direct Replacement for Lennox 70W16 with a 12.69 inch wire length and a 1.5 inch insulator, with a right angle mounting bracket.

CU BN SCRL 10.0HP 575/3/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10.0 °F
Voltage : 575/3/60
Application Capacity* : 40,370 BTU/H
Refrigerant Type : R448A
AWEF Value : 3.15

SUPCO flame sensors can replace many of the popular sensors in today's furnaces that use hot surface or direct spark ignition systems.

CAPACITOR, RUN, RND DUAL, 30+3 MFD, 440V

10,000 AFC pressure sensitive short circuit interrupting capability
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85°C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures, PCB-free oil to prevent over-heating
Meets EIA-456A accelerated life test at 70°C for 60,000 hours
US and Canada UL Approved (C22.2NO.190)
Outside Diameter 1.97 in