AEROSOL COIL CLEANER
Viper is a potent degreasing compound that does not contain any hazardous ingredients or give off toxic fumes. Use it to clean small indoor kitchen equipment, condenser and evaporator coils. No need to rinse the evaporator and the condenser only needs a light water rinse for minimal clean-up. The aerosol injector produces a pin spray of expanding foam that penetrates deep in between the coil fins. The foam will liquefy after a few minutes removing heavily imbedded grease and grime.

Non-Rinsing Formula
Non-Toxic
No Odors
Use on Condensers and Evaporators

To use it's as simple as touching the plastic tip onto any connecting point or move it along an insulated wire. You will be notified if AC voltage is found by a sounded alarm and the plastic tip will glow a bright red. It will turn off at the next break in circuit or wire.

Features

Prevents electrical shocks
Measures: 50 to 1,000 VAC
No switch is required, always ready for use
Sound and bright red glow indicates voltage, buzzer will only react to AC voltage and not static electricity
UL listed
Lifetime Warranty
Applications

AC Voltage in Switches
AC Voltage in wall outlets
AC Voltage in junction boxes

The P70 and P170 Controls for high pressure applications are designed primarily for high pressure cut-out control, head-pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications.

The Robertshaw® 1960 Series Thermocouple is a special low-mass or quick dropout thermocouple. It is usually found on applications that require an oxygen depletion system on the thermo safety. It is also found on many LP gas applications that require a quick dropout of the thermo safety if there is a loss of pilot flame.

ATTENTION: The 1960-027 has standard thermocouple threads, and WILL NOT fit applications with metric threads.

Features and Benefits

Easy burner installation with attached threaded nut
Stainless steel outer jacket for long life and resistance to heat blistering
Combination of copper and nickel alloys for good electrical conductivity
Mica washer to insulate from shorting conditions
Tinnerman clip included
Various lengths available for multiple applications

The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

Controls available for most refrigerant types
High-amp rated switch (SPST) design (O10-1402/O10-1483)
Super Cap® capillary vibration protection system
Non-conductive front cover with captive screw
Adjustable differential and range
Easy-to-read scale plate
Vibration cone (absorbs and reduces vibration away from brazed joint)
Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)
The O16-624 control has additional features:

Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A
Cap included on all Australia temperature controls. Optional for all other regions

The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

Controls available for most refrigerant types
High-amp rated switch (SPST) design (O10-1402/O10-1483)
Super Cap® capillary vibration protection system
Non-conductive front cover with captive screw
Adjustable differential and range
Easy-to-read scale plate
Vibration cone (absorbs and reduces vibration away from brazed joint)
Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)
The O16-624 control has additional features:

Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A
Cap included on all Australia temperature controls. Optional for all other regions

The Ranco® A12 and 9531 Series Constant Cut-in Temperature Controls are designed to switch electrical components of refrigeration systems in response to sensed temperatures.

Features and Benefits

Laser-welded stainless steel bellows
Fixed or adjustable temperature settings
High-amperage contacts
Pneumatic action provided by vapor-filled capillary or capillary with bulb sensing elements
Constant On or Off positions available
Choice of mounting brackets, adjustment ranges and cams, and slotted or flatted shafts
Standard 1/4” quick-connect terminals with optional screw terminals

The Ranco® A12 and 9531 Series Constant Cut-in Temperature Controls are designed to switch electrical components of refrigeration systems in response to sensed temperatures.

Features and Benefits

Laser-welded stainless steel bellows
Fixed or adjustable temperature settings
High-amperage contacts
Pneumatic action provided by vapor-filled capillary or capillary with bulb sensing elements
Constant On or Off positions available
Choice of mounting brackets, adjustment ranges and cams, and slotted or flatted shafts
Standard 1/4” quick-connect terminals with optional screw terminals

The Ranco® O Series Single High Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

NEMA 1 enclosure with non-conductive cover
Front-located captive cover screw
Large, easy-to-read scale plate
Super Cap® capillary protection system
Universal mounting and compact design
Screw terminals are raised and fully accessible for
easy wiring
Laser-welded bellows for extended life
Heavy-duty plated steel frame
Cap included on all Australia temperature controls. Optional for all other regions.

DCL with Schrader valve - Filter Driers
The Danfoss 1.5 hermetic lter driers include a Schrader valve, making servicing the system easy and convenient, and convertible outlet for
tting on capillary tube or ¼ inch system connection. Thanks to the solid core, Danfoss ELIMINATOR® lter driers oer exceptional drying
capacity to protect the system against harmful acids and moisture. The DCL 1.5 cubic inch lter drier with Shrader makes an excellent upgrade
in replacing loose bead driers due to superior drying and small internal volume.

DCL with Schrader valve - Filter Driers
The Danfoss 1.5 hermetic lter driers include a Schrader valve, making servicing the system easy and convenient, and convertible outlet for
tting on capillary tube or ¼ inch system connection. Thanks to the solid core, Danfoss ELIMINATOR® lter driers oer exceptional drying
capacity to protect the system against harmful acids and moisture. The DCL 1.5 cubic inch lter drier with Shrader makes an excellent upgrade
in replacing loose bead driers due to superior drying and small internal volume.

The P70 and P170 Controls for high pressure applications are designed primarily for high pressure cut-out control, head-pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications.

Harris Propane 14.1 oz. hand torch cylinder is designed to fuel hand torches in order to complete a variety of job site projects. This tank works well with Harris' air-fuel hand torches.

Features
Ideal for small soldering applications, such as residential plumbing tube.
Constructed of durable steel
Slim and lightweight cylinder is easy to grip and maneuver
Flame temperature in air is 3600 degreesF (1982 degreesC)
Use with Harris air-fuel hand torches

LITH-EASE is a high-quality, multi-purpose grease for automotive, marine, shop, farm and home use. Manufactured from the highest quality lithium soap, and produced with '12 Hydroxy' hydrogenated castor oil which contributes to the smooth consistency.

Features/Benefits

Excellent water resistance
Long Lasting
Minimal oil separation
Superior performance
Wide temperature range

PAN & DRAIN TREATMENT
Viper Pan and Drain Treatment is a unique gel that contains detergents, enzymes, and silicone. The detergents and enzymes will penetrate and break through the solid layers of slime, sludge, sediment, and remove odor causing bacteria. The silicone coats the pan, p-trap, and drain piping, lubricating to improve flow and prevent future soil adhesion. The slow dissolving gel will outperform and outlast conventional tablets and strips that do not remove these common materials and allow new growth over time, causing restrictions and blockage.

Enzymes Break Down Slime and Sludge
Spray Application Ensures Full Coverage
Leaves Behind a Non-Stick Surface
Available in Gallons for larger applications and quart re-fills

The 10-681 flame sensor is identical to Carrier/BDP part number LH33WZ511. The 10-681 is used in a system with the 41-409 hot surface ignitor.

Specifications

Replaces LH33WZ511

HEAT BLOCKING GEL
Viper Heat Blocking Gel is used to prevent fire or heat damage when using an open flame around wood, drywall, fabric and other components. It can also be used as a heat dissipating gel when protecting sensitive components in low temperature soldering applications. For high temperature brazing, soldering or welding we recommend our Viper Heat Blocking Putty.

Prevents Fires
Protects Sensitive Components
Wipes off easily
Non-Toxic and No Odors

Ideal for cutting soft or hard copper, brass, or aluminum tube used in HVAC/R applications.

ALL PURPOSE WIPES
Viper Wipes are an ultra-strong dual textured hand towels that will clean almost anything. Use to remove dirt, grease, oil, grime, tar, mastic, caulking and more! Towels absorb soils leaving your hands clean. These convenient wipe and go towels are used by professional mechanics on the road, on the roof and in the shop. No water rinse is required. Viper Wipes contain Lanolin, Aloe, and Vitamin E for soothing relief on hands covered with nicks, scraps, and minor cuts.

Waterless Hand Wipes
Cleans Tools and Equipment
Removes Tough Grease and Mastic
Leaves Hands Smooth and Soft

680 Series
Enhance the performance and safety of your HVAC system with the Robertshaw® Goodman Direct Replacement Flame Sensor with a Straight Rod.

Designed as an exact match for Goodman's 0130F00010S.

Will fit in a variety of Goodman and Amana Furnace series, ADV, AMV, CPG, DBG, DC80, DC96, DCG, DD80, DFG, DK92, DM80, DM92S, DM96, DRG, DSG, GC9, GCE, GCH, GM9, GME, GMS, GMV, GPD, GPG.

This COMPUTE-A-CHARGE refrigerant charging/recovery scale features a high capacity of 220lbs (100kg). With accuracy and resolution of 0.25oz (7.39mL) and calibrated to strict NIST standards, this charging scale offers the most advanced load-cell technology, making it an industry-leading scale in HVAC/RR applications.

Heated vent port for walk-in cooler and freezer applications
Commercial quality features
• Heated vents prevent freeze-ups and reduce cooler condensation
• Two way valve unit allows air flow in dual directions and compensates
for expansion and contraction during refrigeration cycles
• 120V/23W
SPECIFICATIONS:
• All aluminum louver construction
• Lexan, self-extinguishing internal sleeve
• Textured aluminum finish
• 120V

0.13

The P70 and P170 Controls for high pressure applications are designed primarily for high pressure cut-out control, head-pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications.

T-1/4, Vinyl Tubing, 1/4" ID x 100FT

This premium-grade ratcheting tube bender kit features a reverse bending option. The kit comes with 7 color-coded tube benders, including 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8in outside diameter benders.

The P70 and P170 Controls for high pressure applications are designed primarily for high pressure cut-out control, head-pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications.