Harris® 3/16 in. x 12 ft. single-line acetylene R-Grade welding hose with A&A connections and (2) 3/8 in. - 24 LH swivel fittings is kink-proof with 8-sided crimped ferrules that can withstand a maximum working pressure of 200 psi. The hose is color-coded red for ease of identification.

Features
Standard duty single line welding hose for acetylene fuel gas ONLY.
3/16 in. x 12 ft., R-Grade, A&A connections with (2) 3/8 in. - 24 LH thread pattern.
Working pressure of 200 PSI max.
Hose is color coded red for acetylene gas service providing easy identification for quick and accurate installation and white ink brand markings along hose length to further prevent misidentification of intended use.
Non-sparking durable brass fittings attached with external ferrules provide full coverage and support of the fitting inserted into the hose.
Non-blooming black EPDM tube minimizes the migration of combustible waxes or plasticizers to the surface of the rubber
Multiple textile plies for strength and kink resistance
Cover reduces dragging friction and provides extra abrasive, heat, mild chemical, ozone and weather resistance.
Conforms to CGA E-1 standard for hoses

CAPACITOR,START,145 – 175 MFD,165V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-7/16 in

CAPACITOR, RUN, RND DUAL, 50+7.5 MFD, 440V

10,000 AFC pressure sensitive short circuit interrupting capability
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85°C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures, PCB-free oil to prevent over-heating
Meets EIA-456A accelerated life test at 70°C for 60,000 hours
US and Canada UL Approved (C22.2NO.190)
Outside Diameter 1.97 in

Strike

This adapter features a 1/4in SAE Male x 1/4in SAE Male Union connection.

Refrigerator overload for Midea® models.

Features/Benefits

Designed for use on Midea® refrigerators
Direct Replacement

ULTRA FLUX
Product Overview

Ultra Flux is a low spattering water based active flux which is used in open air brazing for both ferrous and non-ferrous metals to promote oxide removal.
Premium grade
Low spattering
Good part adhesion
Made in USA
Industry Applications:
Low temperature silver braze alloys (1100F-1600F)

Model Inferno® kit with HA-3i and HA-8i heating tips contains all the quality equipment needed for brazing, and soldering using acetylene gas. The kit can braze up to 5 in. (127.00mm) diameter copper tube and is supplied with a size tip for brazing copper up to 1 ¼ in. tube. The kit can solder up to 6 in. (152.40mm) diameter copper tube and is supplied with a size tip for soldering copper up to 3 in. (76.20mm) tube.

Features
Kit for brazing and soldering using air acetylene gas with quick connect Inferno® tip interchangeability.
Acetylene regulator model 601 with 50mm dual scale plastic gauges, notched adjusting knob and our distinguished internal encapsulated seat filter. The regulator delivers up 15 psi.
Handle HQB-4 is ergonomically designed with a super tough grip for balance and comfort. This handle features quick connectivity for ease of desired heat output
Consumables included: Heating tips HA-3i and HA-8i made of 304 stainless steel utilizing swirl combustion technology.
Accessories included: Shade 5 safety glasses (ANSI Z87.1 CE Weld), Handheld ignitor, 3/16 in. x 12 ft. AxA single T-grade hose, and chrome acetylene cylinder wrench
Crossover PN : (T)0386-0339, (G)447404
Recommended Accessories - Cylinder, CGA 200 MC Empty - PN 8800336
Conveniently packaged in clamshell for point-of-purchase display

CAPACITOR,START,108 – 130 MFD,220V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-13/16 in

These black Mechanix Wear FastFit MFF-05 mechanics gloves are size medium and are made with tricot, synthetic leather, and TrekDry. In addition, they have nylon stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 1. They are full-finger, have a shirred slip-on cuff, and an EN 388 Rating of 2121X. They feature pull straps, reinforced thumb crotch, and touchscreen compatibility.

CAPACITOR,START,540 – 648 MFD,110V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-13/16 in

Cartridge Bearing; 1" Bore; 2-17/32" Outside Diameter; 1" Cartridge Housing Width; Set Screw; Cartridge Unit Housing; Rubber; Ball Bearing; 1.38" Length Thru Bore; Not Relubricatable; SLRS-116 Insert; Single Lip Contact Seal; Non-Expansion