CPS HP6A Offers
This premium refrigerant charge hose is leak-proof 8-sided crimp superior hose construction with "double barrier protection".

Features

R-410A Compatible
Environment friendly nylon permeation barrier meets SAE J2196
Compatible with CFC, HCFC and HFC refrigerants & blends
Adjustable valve core depressor opens all out of tolerance Schraeder® valves
800psi working pressure; 4,000psi burst
All-weather flexibility and strength
Extra deep knurling on nuts for easy grip
1/4in SAE fittings with 45° bend on one end
Available with MicroSeal™ or ball valve fittings
Blow-off grooves channel refrigerant to prevent spray back

CPS HP5A Offers
This premium refrigerant charge hose is leak-proof 8-sided crimp superior hose construction with "double barrier protection".

Features

All-weather flexibility and strength
Adjustable valve core depressor opens all out of tolerance Schraeder® valves
Blow-off grooves channel refrigerant to prevent spray back
Available with MicroSeal™ or ball valve fittings
1/4in SAE fittings with 45° bend on one end

Features
Features A421 Standard model
Control Front Panel LCD:
Displays the temperature, parameters, and status and allows you to adjust the backlight intensity for ambient light conditions. Custom icons display the system and control status.
Basic and Advanced Programming Menu:
Provides two levels of parameter adjustment and control setup, allowing you to set up advanced features in one menu and easily adjust basic parameters in the other menu.
On/Off Temperature Adjustment:
Allows you to select the temperature values at which the relay turns On and Off, which automatically defines the Heating or Cooling mode of operation.
Switch-Activated Temperature Setback:
Allows you to shift the On/Off temperature by an adjustable setback value. When a user-supplied switch closes the binary input control circuit, the control operates at the defined setback temperatures.
Adjustable Anti-Short Cycle Delay:
Allows you to select the minimum time the output relay remains off before the next on cycle; avoiding short cycling, hard starts, and nuisance overload outages on compressors and other inductive applications.
Adjustable Sensor Offset:
Allows you to adjust the displayed temperature to the actual sensed temperature.
Optional Restricted Adjustment Mode:
Allows you to restrict the On/Off adjustment to your defined temperature range.
Sensor Failure Mode:
Allows you to select the relay On/Off state in the event of a sensor or sensor wire failure.
Backlight Brightness Level:
Allows you to adjust the LCD backlight intensity.
Extra Features A421 Defrost model
Off-Cycle Defrost:
Allows you to shut off the refrigeration system for defined defrost time interval and frequency. You can also start or stop a manual only defrost offcycle.
Extra Features A421 Timer model
Free-Cooling and Ventilation:
Allows you to adjust for free-cooling and timed-ventilation, and provides over-cooling protection.

Q106 Electric Furnace Sequencer Device， 2DPST 24 Volt On 1-110 Off 1-110, for Delayed Operation of Electric Furnaces, Fan, Heat Pumps, Gas Furnace

114N3587 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 5HP 1PH
Compressor power supply [V]: 230/1/60
OP-HRXM0500UWK000N

R448A/R449A Capacity range: 41710 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 5406W, AWEF 9.06

R404A/R507 Capacity range: 45690 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 5430W, AWEF 9.64

Product Features
Multi-Grade Oil Compatible with A/C Systems using 1234yf or R134a refrigerant
Safe for hybrid & electric compressors
Complete additive package
Contains UV Dye for Leak Detection
68 cSt viscosity

Heated vent port for walk-in cooler and freezer applications
Commercial quality features
• Heated vents prevent freeze-ups and reduce cooler condensation
• Two way valve unit allows air flow in dual directions and compensates
for expansion and contraction during refrigeration cycles
• 120V/23W
SPECIFICATIONS:
• All aluminum louver construction
• Lexan, self-extinguishing internal sleeve
• Textured aluminum finish
• 120V

Inside release

Strike

A Kason 10056005005 Strike holds a reliable latch point to tighten the door seal and maintain consistent performance in high-volume foodservice settings.

Installing real OEM catches, latches and strikes supports precise alignment with existing hardware, promoting seamless fit and function across varying door offsets for true compatibility
Product Type: Door Latch Strike
Offset: 1 3/4" to 2 1/2"
Color: Chrome

The 1094 Series SureClose Polished Chrome Concealed Mounting Hydraulic Door Closer has a Powerful Gas-Loaded Hydraulic Cylinder that Guarantees Controlled Closure. Solid Steel Enclosed Housing and Bend-Resistant Hook Assure Long Wear in Heavy use, and the Extra-Wide Hook Ensures Roller Pick-up and Overcomes Alignment Problems. The 1094 is a Perfect Complement for Kason Walk-in Hinges and Latches where Self-Closing Doors with Controlled Closure are Needed

Hinges for skid doors

Bolt-type tongue provides positive locking action
Proven, heavy-duty construction outlasts similar latches in hard commercial use
Adjustable strike assures precise adjustment
Padlocking provision standard on all models
Accepts Kason inside release lever to prevent accidental entrapment in locked walk-ins
Inside lever releases cylinder-locked or padlocked door
Unsurpassed for long life and reliability
Inside release sold separately

Hook

The 1095 Series Spring Action Bright Chrome Steel Door Closer Operates by Direct Force Adding to Natural Swing Momentum of Closing Door. The 1095 is Designed to Overcome Slowing Action of Gaskets and Air Pressure, Providing Fast, Full Closure for Heavy Walk-in Doors. This Closer is an Ideal Complement for Kason Walk-in Door Hardware to Provide Self-Closing Doors

The 1248 Series Polished Chrome Cam-Rise Flush Hinge Features a Spring Mechanism that Adds Extra Closing Force to Overcome Air Resistance on Heavy Walk-in Doors. The Special High-Lift Cam Systems Outperforms Similar Spring Hinges and the Cam-Rise Action Reduces Gasket Wear, even with Irregular Floors. Simple Manual Operation Reverses Hinges for use on Right or Left Opening Doors

Standard latch