The HT-VCL-30P 115 Volt high-temperature condensate removal pump with 1-gallon collection tank is designed for plenum applications with the capability to handle the most difficult commercial applications.

The VCMA-15UL is ideal for automatic collection and removal of condensate from air conditioning, refrigeration and de-humidification equipment when gravity drainage is not possible or practical.

VCMA-15ULS Condensate Removal Pump, 1/50 hp, 115 V, 60 Hz, 6' cord, 65 gph @ 1 ft, with Safety Switch. The VCMA-15 Series with a 1/50 hp condensate pump is great for collecting, detecting, and removing condensation from air conditioners.

VCMA-20ULS-PRO Condensate Removal Pump, 1/30 hp, 230 V, 50/60 Hz, 6' cord, 84 gph @ 1 ft, with Safety Switch and 3/8" Check Valve. VCMA-20ULS-PRO pump effectively delivers high-efficiency condensate removal from air conditioners, gas furnaces, and condensing boilers.

VCMA-20ULS-PRO Condensate Removal Pump, 1/30 hp, 115 V, 60 Hz, 6' cord, 84 gph @ 1 ft, with Safety Switch and 3/8" Check Valve. VCMA-20ULS-PRO pump effectively delivers high-efficiency condensate removal from air conditioners, gas furnaces, and condensing boilers.

VCMA-20UL-PRO Condensate Removal Pump, 1/30 hp, 115 V, 60 Hz, 6' cord, 84 gph @ 1 ft. VCMA-20-PRO Series effectively delivers high-efficiency condensate removal from air conditioners, gas furnaces, and condensing boilers.

VCCA-20ULS Series Low Profile Condensate Pump, 230 V, 60 Hz, 6' cord

The VCCA-20 Series Condensate Pump is designed for the automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also, suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

T-20/25 Tubing, 3/8" x 20FT

T-3/8, Vinyl Tubing, 3/8" ID x 100FT

Bold Fasteners 8 3/4

Carrying stand for "B" acetylene tank. This model is constructed of enameled steel making it sturdy, yet portable. The convenient utility tray and air/fuel handle holder provides easy storage of tips, handle, hose and striker.

Model 26-L high quality replacement flints for hand-held single ignitors. They are economically priced to work with most single flint lighters. The flint securely remains seated in the aluminum flint holder for longer service life. Produces up to 1500 ignitions. Packaged 5 per holder.

Features
Replacement flints for use with single flint ignitors/strikers
For use with Harris Ignitor - PN 9004486
Five single flint replacements provide generous life to its ignitor.
Flints seated in aluminum holder for longer service life
Economically priced for a great value
Ease installation into ignitor

Single flint ignitor is made of stainless steel with a large square hood and strong metal frame. It is lightweight, economical and dependable. It is the most popular ignitor in the industry and features a generous flint with a rotating wear-resistant file. Powertorch® single flint ignitor with replacement flint. Packaged 10 ignitors per case. Replaceable flints sold separately - PN 9004484.

Features
Most popular ignitor in the industry
Large square hood and strong metal frame
Long-life ignitor
Generous flint and rotating wear-resistant file
Uses low cost replacement flints

Harris Propane 14.1 oz. hand torch cylinder is designed to fuel hand torches in order to complete a variety of job site projects. This tank works well with Harris' air-fuel hand torches.

Features
Ideal for small soldering applications, such as residential plumbing tube.
Constructed of durable steel
Slim and lightweight cylinder is easy to grip and maneuver
Flame temperature in air is 3600 degreesF (1982 degreesC)
Use with Harris air-fuel hand torches

MAP-Pro™ 14.1 oz. hand torch cylinder contains premium fuel suited for a variety of job site projects. MAP-Pro works faster and more efficiently with a higher burn temperature than standard propane. This tank works well with Harris' air-fuel hand torches.

Features
Provides maximum heat output and transfer for more efficient use
Faster soldering times than Harris' propane cylinders
Flame temperature in air of 3730 degrees F (2054 degrees C)
Constructed of durable steel
Slim and lightweight cylinder is easy to grip and maneuver
250 PSI operating pressure
Use with Harris air-fuel hand torches
One year warranty

Model HSLT604HD air-fuel hand torch provides high performance and convenience to professional heating, ventilation, air conditioning, plumbing and refrigeration contractors. Built with heating performance, temperature consistency and flame control in mind, a Harris hand torch is the perfect partner for demanding brazing and soldering applications. This heavy-duty trigger torch is for use with MAP-Pro™ and Propane.

Features
Piezo igniter for instant flame
Red plastic ignition button lock for continuous use
Swirl combustion tip
Ergonomic handle design
Brass flame adjusting knob
Heavy-duty construction
For use with MAP-Pro™ and Propane 14.1 oz. non-refillable cylinders
Three year warranty
Conveniently packaged in clamshell for point-of-purchase display

HSLT604-HD Trigger Self-Lighting Air-Fuel Hand Torch

Harris® 400 PSI/28 BAR 50mm replacement pressure gauge has a black ABS plastic case, polycarbonate clear snap-in lens, steel dial and brass lower mount male stem with 1/8 in. BSP thread connection. Requires a mounting gasket - PN 9000643 (sold separately). The dual scale black markings on a white background makes it easy-to-read. This gauge is ideal for gas distribution to denote the pressure levels on regulators using non-corrosive gas. "Use No Oil" marking on dial face for clarification. This gauge is UL listed and meets ASME B40.1 standards.

Features
Black ABS plastic construction is lightweight while durable
50mm dial diameter
400 PSI / 28 BAR pressure rating
Easy-to-read white steel background with black markings
Snap-in polycarbonate clear lens
Brass 1/8 in. BSP threaded lower stem mount
Meets ASME B40.1 standards
UL listed
One year warranty
Gauge mount in requires a gasket - PN 9000643 (sold separately)

Harris® 30RZ PSI/2 BAR 50mm replacement pressure gauge has a black ABS plastic case, polycarbonate clear snap-in lens, steel dial and brass lower mount male stem with 1/8 in. BSP thread connection. Requires a mounting gasket - PN 9000643 (sold separately). The dual scale red and black markings on a white background makes it easy-to-read. This gauge is ideal for gas distribution to denote the pressure levels on regulators using acetylene. "Use No Oil" marking on dial face for clarification. This gauge is UL listed and meets ASME B40.1 standards.

Features
Black ABS plastic construction is lightweight while durable
50mm dial diameter
30RZ PSI / 2 BAR pressure rating
Easy-to-read white steel background with red and black markings
Snap-in polycarbonate clear lens
Brass 1/8 in. BSP threaded lower stem mount
Meets ASME B40.1 standards
UL listed
One year warranty
Gauge mount in requires a gasket - PN 9000643 (sold separately)

Harris® 3/16 in. x 12 ft. single-line acetylene R-Grade welding hose with A&A connections and (2) 3/8 in. - 24 LH swivel fittings is kink-proof with 8-sided crimped ferrules that can withstand a maximum working pressure of 200 psi. The hose is color-coded red for ease of identification.

Features
Standard duty single line welding hose for acetylene fuel gas ONLY.
3/16 in. x 12 ft., R-Grade, A&A connections with (2) 3/8 in. - 24 LH thread pattern.
Working pressure of 200 PSI max.
Hose is color coded red for acetylene gas service providing easy identification for quick and accurate installation and white ink brand markings along hose length to further prevent misidentification of intended use.
Non-sparking durable brass fittings attached with external ferrules provide full coverage and support of the fitting inserted into the hose.
Non-blooming black EPDM tube minimizes the migration of combustible waxes or plasticizers to the surface of the rubber
Multiple textile plies for strength and kink resistance
Cover reduces dragging friction and provides extra abrasive, heat, mild chemical, ozone and weather resistance.
Conforms to CGA E-1 standard for hoses