The Robertshaw® aluminum tubing is versatile for all your replacement needs. It comes in a full range of sizes in 50 foot and 5 foot lengths.

Features and Benefits

Aluminum tubing meets ASTMB Standard #483
Uses a 1435 alloy with a 0.035" wall thickness
Tubing is rated at 90 PSI with an 11,000 tensile, 9500 yield and a 25% elongation

The Robertshaw® aluminum tubing is versatile for all your replacement needs. It comes in a full range of sizes in 50 foot and 5 foot lengths.

Features and Benefits

Aluminum tubing meets ASTMB Standard #483
Uses a 1435 alloy with a 0.035" wall thickness
Tubing is rated at 90 PSI with an 11,000 tensile, 9500 yield and a 25% elongation

114N3582 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 2.5HP 3PH
Compressor power supply [V]: 230/3/60
OP-HNXM0250UWK000Q

R448A/R449A Capacity range: 22000 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 3013W, AWEF 8.79

R404A/R507 Capacity range: 24040 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 2973W, AWEF 10.04

EVR Version 2 - Solenoid Valves
EVR Version 2 solenoid valves are direct or servo-operated solenoid valves for liquid, suction, and hot gas lines. They are suitable for all
refrigeration, freezing, and air conditioning applications and are compatible with fuorinated refrigerants. The valves can be delivered as
normally open or closed as well as with or without manual operation.

Seal kit (NC); (4) O-rings, (2) Al. gaskets

114N3595 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) LOW 5HP 3PH
Compressor power supply [V]: 230/3/60
LNYM0500UWL000Q

R448A/R449A Capacity range: 18620 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =-10°F), Power consumption 4297W, AWEF 3.48

R404A/R507 Capacity range: 22070 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =-10°F), Power consumption 4462W, AWEF 3.77

114N3586 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 4HP 3PH
Compressor power supply [V]: 230/3/60
OP-HNXM0400UWK000Q

R448A/R449A Capacity range: 34040 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 4455W, AWEF 9.40

R404A/R507 Capacity range: 36450 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 4596W, AWEF 9.62

Dramatically reduces the time to make flares and has a tool used with a cordless drill for the fastest flaring.

AEROSOL COIL CLEANER
Viper is a potent degreasing compound that does not contain any hazardous ingredients or give off toxic fumes. Use it to clean small indoor kitchen equipment, condenser and evaporator coils. No need to rinse the evaporator and the condenser only needs a light water rinse for minimal clean-up. The aerosol injector produces a pin spray of expanding foam that penetrates deep in between the coil fins. The foam will liquefy after a few minutes removing heavily imbedded grease and grime.

Non-Rinsing Formula
Non-Toxic
No Odors
Use on Condensers and Evaporators

Service kit (NC); diaphragm assembly, O-ring, (4) screws, armature assembly, rubber gasket, refrigeration gasket, compression spring

The Robertshaw® 1751 Series Add-on Pressure Regulator Kits are available for use on the following factory model types: 7000, 7010, 7100, 7200 and 7222. Each 1751 pressure
regulator kit provides straight-line regulation and includes all the necessary parts including instructions to convert a specific factory model gas valve.

Features and Benefits

Converts natural gas to LP
Not for use with hydraulic models which cannot be field converted
Includes all necessary parts for easy regulation conversion

114N3592 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 7.5HP 3PH
Compressor power supply [V]: 230/3/60
HRXM0750UWK000Q

R448A/R449A Capacity range: 66910 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 7665W, AWEF 10.28

R404A/R507 Capacity range: 72410 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 8089W, AWEF 10.66

The P70 and P170 Controls for high pressure applications are designed primarily for high pressure cut-out control, head-pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications.

114N3577 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 2HP 1PH
Compressor power supply [V]: 230/1/60
OP-HNXM0200UWK000N

R448A/R449A Capacity range: 17070 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 2408W, AWEF 8.44

R404A/R507 Capacity range: 18870 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 2359W, AWEF 10.06

The P70 and P170 Controls for high pressure applications are designed primarily for high pressure cut-out control, head-pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications.

Seal kit (NC); O-ring for armature tube, rubber gasket, O-ring for steel cover, support ring

Single-Component, Acetoxy Silicone Sealant
Tremsil® 200 is a single-component, acetoxy silicone sealant. Tremsil 200 cures to a flexible rubber when exposed to moisture present in the air.

Basic Uses
Tremsil 200 produces a weathertight seal to glass, metal, porcelain, ceramic and most painted surfaces.
Tremsil 200 sealant is suitable for use in kitchens, bathrooms and spas.