1 HP 220V, 1Ph, 1625W, 7.4Amps (Capacity - 8ft x 10ft x 8ft), 5800 BTU

2 HP    :  220V, 1Ph, 2787W, 15.7Amps, 5700 BTU

ALL PURPOSE WIPES
Viper Wipes are an ultra-strong dual textured hand towels that will clean almost anything. Use to remove dirt, grease, oil, grime, tar, mastic, caulking and more! Towels absorb soils leaving your hands clean. These convenient wipe and go towels are used by professional mechanics on the road, on the roof and in the shop. No water rinse is required. Viper Wipes contain Lanolin, Aloe, and Vitamin E for soothing relief on hands covered with nicks, scraps, and minor cuts.

Waterless Hand Wipes
Cleans Tools and Equipment
Removes Tough Grease and Mastic
Leaves Hands Smooth and Soft

680 Series
Enhance the performance and safety of your HVAC system with the Robertshaw® Trane Direct Replacement Flame Sensor with a 90° Bend.

Designed as an exact match for Trane's SEN01114.

Will fit over 500 Trane furnace series, AUC1D1, AUD1, AUD2, TDC1, TDD1, TDD2, TDH1, TDH2, TDH3, TDHM, TUD1, TUD2, TUE, TUH.

680 Series
Enhance the performance and safety of your HVAC system with the Robertshaw® Lennox Direct Replacement Flame Sensor with a 90° Bend.

Designed as an exact match for Lennox's 69W43.

Will fit over 1,000 Lennox furnace series, 80AF1, 92AF1, 95AF, EL1, EL296, SLP98, SLP99.

680 Series
Enhance the performance and safety of your HVAC system with the Robertshaw® Goodman Direct Replacement Flame Sensor with a Straight Rod.

Designed as an exact match for Goodman's 0130F00010S.

Will fit in a variety of Goodman and Amana Furnace series, ADV, AMV, CPG, DBG, DC80, DC96, DCG, DD80, DFG, DK92, DM80, DM92S, DM96, DRG, DSG, GC9, GCE, GCH, GM9, GME, GMS, GMV, GPD, GPG.

TREATS UP TO 6 TON UNIT.
Permanently seals leaks in A/C & refrigeration systems.
Does not contain polymers, will not harm A/C system or components.
Additive package protects against future corrosion.
Compatible with all lubricants & refrigerants.
Reduces compressor noise and extends compressor life.

SILVALOY 450
Product Overview

Silvaloy 450 is a sluggish general purpose alloy used for joining ferrous and non-ferrous metals. It is most useful for its color match on brass instruments, though it has also found use in tubular assemblies in ship construction and some aircraft engine coolers.
Can fill large joint clearances
Low temperature
Cadium-Free
Made in USA
Industry Applications:
Brass band instruments, brass lamps, aircraft engine coolers

Easy-Twist wire connectors are the professional choice for forming quick, secure connections between wires in the field. The specialized spring design grips in fewer twists and the outside of the connector is ribbed to offer a comfortable grip.

[Conical Spring] The fixed zinc-plated square spring has a precise conical shape that grips in fewer turns and can dead end a single wire
[Ergonomic Grip] Entire connector features a ribbed texture for easier twisting and a more secure gripping surface to increase your productivity
[Thermoplastic Shell] NSI connectors have a flame-retardant UL 94V-2 thermoplastic body that delivers durable performance and electrical insulation
[Compact Design] Easy to install in tight areas; the extra-thick cap, deep-skirt entry and threaded funnel make these connectors more reliable and protect against flashover and shorts
[Labor Saving] Save time and effort with professional-quality connectors that install in half the time of a typical wire connector and don’t require pre-twisting of wires

Easy-Twist wire connectors are the professional choice for forming quick, secure connections between wires in the field. The specialized spring design grips in fewer twists and the outside of the connector is ribbed to offer a comfortable grip.

[Conical Spring] The fixed zinc-plated square spring has a precise conical shape that grips in fewer turns and can dead end a single wire
[Ergonomic Grip] Entire connector features a ribbed texture for easier twisting and a more secure gripping surface to increase your productivity
[Thermoplastic Shell] NSI connectors have a flame-retardant UL 94V-2 thermoplastic body that delivers durable performance and electrical insulation
[Compact Design] Easy to install in tight areas; the extra-thick cap, deep-skirt entry and threaded funnel make these connectors more reliable and protect against flashover and shorts
[Labor Saving] Save time and effort with professional-quality connectors that install in half the time of a typical wire connector and don’t require pre-twisting of wires

ICE MACHINE CLEANERS
Until now, ice machine cleaners were nothing more than low tech phosphoric acid. Our Viper Ice Machine cleaner is formulated with an advanced blend of organic acids that will remove more scale faster than any other product of its kind. It is a stronger acidic cleaner and is lower in toxicity, non-fuming, less corrosive and environmentally preferred over phosphate based chemicals.

Approved for Nickel Plated Evaporators
Removes More Scale Buildup
Faster Acting Formula
Phosphate Free

Dramatically reduces the time to make flares and has a tool used with a cordless drill for the fastest flaring.

The Robertshaw® aluminum tubing is versatile for all your replacement needs. It comes in a full range of sizes in 50 foot and 5 foot lengths.

Features and Benefits

Aluminum tubing meets ASTMB Standard #483
Uses a 1435 alloy with a 0.035" wall thickness
Tubing is rated at 90 PSI with an 11,000 tensile, 9500 yield and a 25% elongation

The Robertshaw® 2374 Series Adjustable Air Sensing Switches are designed to replace a wide variety of air sensing switches found in residential and light commercial applications including furnaces, electronic air cleaners and humidifiers. Two models are currently available with adjustable ranges. Both models are provided with an SPDT switch that can be actuated by positive or negative pressure or by pressure differential. Highly accurate, these switches are practically insensitive to temperature change with an operating temperature range of -40°F to 190°F (-40°C to 88°C). Each switch includes mounting hardware and an adjustment tool for easy installation and calibration.

Features and Benefits
Field adjustable control set point
Air sample line connectors will accept 1/8”, 1/4” or 3/8” tubing
Electrical connection is 1/4” spade
Vertical operating mounting position for diaphragm
UL File Number MH6213, CSA File Number LR18754

The Robertshaw® 2374 Series Adjustable Air Sensing Switches are designed to replace a wide variety of air sensing switches found in residential and light commercial applications including furnaces, electronic air cleaners and humidifiers. Two models are currently available with adjustable ranges. Both models are provided with an SPDT switch that can be actuated by positive or negative pressure or by pressure differential. Highly accurate, these switches are practically insensitive to temperature change with an operating temperature range of -40°F to 190°F (-40°C to 88°C). Each switch includes mounting hardware and an adjustment tool for easy installation and calibration.

Features and Benefits
Field adjustable control set point
Air sample line connectors will accept 1/8”, 1/4” or 3/8” tubing
Electrical connection is 1/4” spade
Vertical operating mounting position for diaphragm
UL File Number MH6213, CSA File Number LR18754

SILVALOY 560
Product Overview

Silvaloy 560 is the lowest temperature, cadmium-free, silver based filler metal available. Silvaloy 560 can be used for both ferrous and non-ferrous alloys; it's a free-flowing alloy ideal for many applications including food-grade or medical grade.
Cadmium-free
Low temperature
Very fluid alloy flow
Made in USA
Industry Applications:
Food handling equipment, refrigeration tubing, automotive

The J10 Series Humidistats and Dehumidistats are designed to regulate the relative humidity of confined spaces by cycling humidifying or dehumidifying equipment. Designed for central systems, the J10 controls are made from high impact plastic with a brushed finish dial plate. The J10's nylon sensing element provides long life and accurate humidity control.

Features and Benefits

Strong plastic frame with integral switch eliminates the need to ground the control
Improved woven nylon sensing element provides a faster response time
Greater stability in set points over dramatic changes in relative humidity
Improved differential allowing 5% relative humidity