0.065

0.399

0.069

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

Line service valve ¼" copper tubing, wrench cap and core

Features/Benefits

¼" Copper Tubing
Made of CDA 360 brass
Wrench Cap and Core

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

This service wrench features a chrome finish and 3/16in, 1/4in, 5/16in and 3/8in straight square drives.

Heated vent port for walk-in cooler and freezer applications
Commercial quality features
• Heated vents prevent freeze-ups and reduce cooler condensation
• Two way valve unit allows air flow in dual directions and compensates
for expansion and contraction during refrigeration cycles
• 120V/23W
SPECIFICATIONS:
• All aluminum louver construction
• Lexan, self-extinguishing internal sleeve
• Textured aluminum finish
• 120V

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

This pocket valve core tool is designed to remove and install valve cores.

Highside® TRACE2 is a red, fluorescent tracer leak detector for refrigeration, air conditioning and hydraulic systems. It is a concentrated dye with a fluorescent additive in a Polyolester lubricant base.

Features/Benefits

4 ounce plastic bottle
Clearly visible, even through ice and frost
Compatible with all refrigerants and lubricants, old and new
Fluorescent under ultraviolet light
Leaks show as bright red stains
Locates leaks exactly, no false positives
Non-volatile, will not sludge or deposit gum
Polyol Ester base
Use ⅛ oz. per pound of refrigerant
Use to locate the hardest to find leaks under the toughest conditions

2.25" diameter round mirror on a telescoping handle, used to see around corners and under hard to reach areas.

Features/Benefits

2 ¼" round glass mirror
Double ball joint head adjustment
Extendable/retractable design
Vinyl grip handle

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping.

Features/Benefits

100 % helium and hydrogen leak tested
Compatible with all refrigerants
Deep pitch stainless steel hose and high tensile wire braid
Unique proven design for high pressure applications rated for R410A

Line service valve 1/8" copper tubing, wrench cap and core

Features/Benefits

⅛" Copper Tubing
Made of CDA 360 brass
Wrench Cap and Core

PHLiPBiT™ solves the frustrating problem of driving or removing Square or Phillips screws on a common project. They combined the most popular tips & created a fully featured dual drive “Flip-&-Go” power bit.

1 Bit – 2 Tip System offers quick release convenience and industry leading benefits. Designed and strengthened with industrial grade tool steel, TruTorq hardened tips, precision recess contact, magnetic ends & torsion control zone. Impact rated heritage provides toughness, durability & maximum drive life with less strip out. Color coded body, laser etched ID markings. 1/4″ hex shank fits all impact drive machines and their Q/R Uni-Collet.

One PHLiPBiT replaces 2 singles, reduces inventory, saves time, money, produces frustration free, rapid load screw driving.

CAPACITOR, RUN, RND DUAL, 40+5 MFD, 440V

10,000 AFC pressure sensitive short circuit interrupting capability
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85°C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures, PCB-free oil to prevent over-heating
Meets EIA-456A accelerated life test at 70°C for 60,000 hours
Ul Standard US and Canada UL Approved (C22.2NO.190)
Outside Diameter 1.97 in

Protect hands with these black disposable nitrile Grease Monkey gloves. These gloves are powder-free, have an eight mil thickness, are 11 inches long, and are size extra-large. They come in a pack of 50 and are ideal for clinics and some industrial settings.

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

CAPACITOR, RUN, RND DUAL, 25+5 MFD, 440V

10,000 AFC pressure sensitive short circuit interrupting capability
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85°C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures, PCB-free oil to prevent over-heating
Meets EIA-456A accelerated life test at 70°C for 60,000 hours
US and Canada UL Approved (C22.2NO.190)
Outside Diameter 1.97 in

Keep hands protected with these black disposable Grease Monkey gloves. They are powder-free, they have an eight mil thickness, are 11 inches long, and size large. These gloves come in a pack of 50 and are ideal for clinics and some industrial settings.

The 1248 Series Polished Chrome Cam-Rise Flush Hinge Features a Spring Mechanism that Adds Extra Closing Force to Overcome Air Resistance on Heavy Walk-in Doors. The Special High-Lift Cam Systems Outperforms Similar Spring Hinges and the Cam-Rise Action Reduces Gasket Wear, even with Irregular Floors. Simple Manual Operation Reverses Hinges for use on Right or Left Opening Doors

The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear.

Vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads.

Flex-Weave™ oil and heat resistant cover protects the belt core from the toughest environments.

All sizes meet Gates V80™ system matching tolerances.

Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements. REACH and RoHS 2 compliant.

CAPACITOR, RUN, RND, 15 MFD, 440V

10,000 AFC pressure sensitive short circuit interrupting capability
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85°C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures, PCB-free oil to prevent over-heating
Meets EIA-456A accelerated life test at 70°C for 60,000 hours
US and Canada UL Approved (C22.2NO.190)
Outside Diameter 1.77 in

Telescoping tools match clip, magnet and inspection mirrors

Features/Benefits

1 ¼" round glass mirror
Carry pouch included
Double ball joint head adjustment
Extendable/retractable design
Glass mirrors
Magnified glass mirror available with IM5
Pocket clip

Temperature range: 0°f/80°f and -17°c/26°c
Great quality product
Wall bracket included for mounting
Model Number : 5636

CPS HP5A Offers
This premium refrigerant charge hose is leak-proof 8-sided crimp superior hose construction with "double barrier protection".

Features

All-weather flexibility and strength
Adjustable valve core depressor opens all out of tolerance Schraeder® valves
Blow-off grooves channel refrigerant to prevent spray back
Available with MicroSeal™ or ball valve fittings
1/4in SAE fittings with 45° bend on one end