0.065

114N3591 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 7HP 3PH
Compressor power supply [V]: 230/3/60
HRXM0700UWK000Q

R448A/R449A Capacity range: 55260 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 6907W, AWEF 9.83

R404A/R507 Capacity range: 58470 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 6912W, AWEF 10.45

DCL/DCB/DAS/DCR - Filter Driers
Danfoss lter driers function as simple drop-in replacements for most driers sold in the aftermarket or installed on equipment by
manufacturers. All Danfoss lter driers are constructed with a solid core design to maximize moisture removal while minimizing pressure
drop. These driers use a mixture of molecular sieve and activated alumina to both adsorb system moisture and capture acid and prevent
solid contaminants from entering the system. The Danfoss 1.5 cubic inch hermetic lter drier can be used in hydrocarbon systems to provide
exceptional protection while minimizing charge requirements.

The Jumper King° allows you to quickly bypass any low voltage thermostat regardless of terminal style. This patent-pending all-in-one kit comes with everything you need to locate low-voltage shorts and eliminate compressor short cycling.

Features/Benefits

2-Spade Adapters, Jumper King° Thermostat Bypass Tool, Hard Carrying Case
6-Alligator Clips, 6-Magnetic Tips, 6-Jumper Leads, 6-Self Piercing Insulation Tips
For Use on low voltage circuits only (0-30VAC/VDC)
Four types of interchangeable tips: spade adapters, alligator clamps, magnetic tips and self-piercing insulation tips
Inovative selector switches to activate leads/circuits of your choosing at any time
No batteries required - powered by the low voltage in theA/C unit
Rugged unit has a rubberized boot, a magnet and fold-out hook for convenient mounting
Will never short out - contains a resettable popper fuse
Works on multiple stage units including heat pumps

SILVALOY 452 FLUX COATED (Blue)
Product Overview

Silvaloy 452 Flux Coated is a flux coated Silvaloy brazing rod. In addition to bare and cored high silver brazing alloys, we also offer rods that are coated with our general purpose Handy Flux.
Improved joint strength due to less flux inclusions
Minimizes post-braze cleaning
Reduces brazing cycle times
Made in the USA
Industry Applications:
Brass band instuments, brass lamps, aircraft engine coolers

0.13

DCL/DCB/DAS/DCR - Filter Driers
Danfoss lter driers function as simple drop-in replacements for most driers sold in the aftermarket or installed on equipment by
manufacturers. All Danfoss lter driers are constructed with a solid core design to maximize moisture removal while minimizing pressure
drop. These driers use a mixture of molecular sieve and activated alumina to both adsorb system moisture and capture acid and prevent
solid contaminants from entering the system. The Danfoss 1.5 cubic inch hermetic lter drier can be used in hydrocarbon systems to provide
exceptional protection while minimizing charge requirements.

114N3582 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 2.5HP 3PH
Compressor power supply [V]: 230/3/60
OP-HNXM0250UWK000Q

R448A/R449A Capacity range: 22000 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 3013W, AWEF 8.79

R404A/R507 Capacity range: 24040 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 2973W, AWEF 10.04

• 9 Vertical pockets
• 2 Through pockets for long shanked tools
• Back Pocket Stuffer™
• Electrical tape strap
• 2 D-rings
• Wire-formed & nylon plastic belt clip
• Stainless tape clip
• Leather & synthetic fiber construction
• 5-year limited warranty

114N3589 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 6HP 3PH
Compressor power supply [V]: 230/3/60
HRXM0600UWK000Q

R448A/R449A Capacity range: 50610 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 6504W, AWEF 9.64

R404A/R507 Capacity range: 54180 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 6264W, AWEF 10.57

Features:

Attacks Corrosion: Frees bolts, fasteners and other mechanical components
Removes Rust and Carbon Deposits: Will not attack or damage metal
Penetrates Faster: Penetrates quicker and deeper than similar products
Works Everywhere: Use on any corroded threads or tight parts
Simplifies Repairs: Makes the toughest maintenance jobs easier, faster and safer to execute.
Penetrates Deeper: Penetrates the smallest spaces, threads and openings
Details:

Loosen frozen metal parts the professional way, with Kroil original penetrant in liquid and aerosol (formerly Aero Kroil) formulas. Discover why this is the best penetrating oil to loosen bolts in various applications. When it comes to freeing corroded items in tough spaces, nothing rivals powerful, industry-proven Kroil penetrating oil. Used and trusted by pros and experienced DIYers alike since 1939, Kroil quickly loosens rusted nuts and bolts, frees frozen shafts, pulleys, and more. No space is too tight to reach, thanks to Kroil's ability to penetrate the smallest opening, thread or crevice. Corrosion meets its match, as Kroil removes and prevents rust, cleans and lubricates, and displaces moisture.

Seal kit (NC/NO); O-ring for armature tube, rubber gasket, support ring

114N3580 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 3HP 3PH
Compressor power supply [V]: 230/3/60
OP-HNXM0300UWK000Q

R448A/R449A Capacity range: 23320 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 3187W, AWEF 9.92

R404A/R507 Capacity range: 25290 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 3187W, AWEF 9.92

• Vertical Tool Pockets: 39 Interior and Exterior
• Neoprene Meter Pockets
• Interior Magnetic Screw Catcher
• 2 Storage Bays- 4 Storage Platforms
• Padded EVA Thermoformed Ergonomic Back Padding
• 8" Electrical Tape Strap
• Gray Pockets For Better Visibility
• Upper Pockets (Front Side) Designed For Extra Tool Capacity
• Waterpoof & Abrasion Resistant Hard Bottom
• Waterproof 3mm Polypropylene Base
• Quick Release Metal Hasp Allows Easy Access To Rear Storage Bay & Positive Connection To Bag Body
• YKK® Locking Zippers
• D-Rings: Powder Coated Steel
• Warranty: 5 Years (see Veto warranty terms and conditions)

114N3597 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) LOW 8HP 3PH
Compressor power supply [V]: 230/3/60
LNYM0600UWL000Q

R448A/R449A Capacity range: 27310 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =-10°F), Power consumption 6222W, AWEF 3.39

R404A/R507 Capacity range: 33350 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =-10°F), Power consumption 6360W, AWEF 3.76

ILVALOY 560 FLUX COATED (Orange)
Product Overview

Silvaloy 560 Flux Coated is a flux coated Silvaloy brazing rod. In addition to bare and cored high silver alloys, we also offer rods that are coated with our general purpose Handy Flux.
Improved joint strength due to less flux inclusions
Minimizes post-braze cleaning
Reduces brazing cycle times
Made in the USA
Industry Applications:
Ferrous and non-ferrous alloys, food handling equipment, refrigeration tubing

he SHL Series of 3/4" (19mm) bimetal disc temperature controls offers proven reliability in a versatile, cost-effective design. Can handle loads up to 25 amps at 240VAC.

Features/Benefits

Available with automatic and manual reset SPST or automatic reset SPDT switch configurations.
CSA approved
Limit - open on rise
UL® recognized
Welded construction for integrity of current-carrying components.

The SHL Series of 3/4" (19mm) bimetal disc temperature controls offers proven reliability in a versatile, cost-effective design. Can handle loads up to 25 amps at 240VAC.

CPS HP6A Offers
This premium refrigerant charge hose is leak-proof 8-sided crimp superior hose construction with "double barrier protection".

Features

R-410A Compatible
Environment friendly nylon permeation barrier meets SAE J2196
Compatible with CFC, HCFC and HFC refrigerants & blends
Adjustable valve core depressor opens all out of tolerance Schraeder® valves
800psi working pressure; 4,000psi burst
All-weather flexibility and strength
Extra deep knurling on nuts for easy grip
1/4in SAE fittings with 45° bend on one end
Available with MicroSeal™ or ball valve fittings
Blow-off grooves channel refrigerant to prevent spray back