Finds leaks quickly & easily.
Solvent free, safe for all refrigerantion systems and equipment.
Compatible with all lubricants and refrigerants.
Anti-wear agents and friction modifiers enhance compressor and A/C system efficiency while reducing compressor wear.
Anti-oxidants protect system against formation of sludge & other deposits.

These 1/4in premium valve cores come in a pack of 10.

This adapter features a 3/8in SAE Male x 1/4in SAE Female connection.

These 1/4in premium valve cores come in a pack of 100.

These 1/4in premium valve cores come in a pack of 25.

CPS HP5A Offers
This premium refrigerant charge hose is leak-proof 8-sided crimp superior hose construction with "double barrier protection".

Features

All-weather flexibility and strength
Adjustable valve core depressor opens all out of tolerance Schraeder® valves
Blow-off grooves channel refrigerant to prevent spray back
Available with MicroSeal™ or ball valve fittings
1/4in SAE fittings with 45° bend on one end

Product Features
Multi-Grade Oil Compatible with A/C Systems using 1234yf or R134a refrigerant
Safe for hybrid & electric compressors
Complete additive package
Contains UV Dye for Leak Detection
68 cSt viscosity

For use with refrigeration hoses, these SAE neoprene gaskets and core depressors feature a 0.25" size and come in a pack of 10 units each.

For use with refrigeration hoses, these SAE neoprene gaskets feature a 0.375" size and come in a pack of 10.

High Powered leak detection lamp.
3-modes of operation HIGH BEAM LOW BEAM STROBE.
3) AAA heavy duty batteries included.
Illuminates fluorescent dyes brilliantly.
Hight intensity beam makes even small leaks visible and is bright enough to be used in low light as well as daylight and brightly lit areas.
LED has Extra long life LED and produces an intense UV light.
Anodized aluminum, rugged construction.
Nylon wrist lanyard. Drop test at 1 meter.
On/Off/mode push-button switch.

This adapter features a 1/4in SAE Male x 1/4in SAE Male Union connection.

CAPACITOR, RUN, RND DUAL, 30+3 MFD, 440V

10,000 AFC pressure sensitive short circuit interrupting capability
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85°C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures, PCB-free oil to prevent over-heating
Meets EIA-456A accelerated life test at 70°C for 60,000 hours
US and Canada UL Approved (C22.2NO.190)
Outside Diameter 1.97 in

SEAL, CAP, W/NEO , SEAL, BRS
Nominal Size 1/4 in Flare Knurled

SEAL, CAP, W/NEO , SEAL, BRS, 1/4 IN, NEO

Heavy duty hex brass cap with neoprene seal

KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits – allowing for maximum productivity and safety for you and your employees. With KleenGuard™ V30 Maverick™ Safety Glasses, you get sleek, modern eyewear with durable, lightweight construction, so you don't have to sacrifice style or safety. KleenGuard™ V30 Maverick™ Eye Protection provides 99.9% UVA/UVB/UVC protection. Available in a variety of colors and premium lens coatings, these safety glasses also come with comfort touch points on the temples and nose bridge. KleenGuard™ V30 Maverick™ Safety Glasses meet the optical requirements and impact protector requirements of the ANSI Z87.1+ standards, with integrated side shields and browguard to help the user feel confident they are protected. Both men and women will find the stylish KleenGuard™ V30 Maverick™ Safety Glasses to be comfortable and functional, giving you and your employees uncompromised protection. In addition, these safety glasses are recyclable through The RightCycle™ Program, the first manufacturer-led PPE recycling program. Making the right Personal Protection choice is difficult. Perform with distinction with KleenGuard™ Personal Protective Equipment (PPE).
KleenGuard™ V30 Maverick™ Safety Glasses; Smoke Lenses with KleenVision™ Anti-Fog coating; Black Frame; Unisex Sunglasses for Men and Women
Features durable, lightweight construction with a modern, sleek and stylish design that your employees will be happy to wear.
Polycarbonate lenses provide 99.9% UVA/UVB/UVC protection; meets the ANSI Z87.1+ standards
Available in a variety of colors and premium lens coatings for better performance and longer life
Recyclable through The RightCycle™ Program, the first manufacturer-led PPE recycling program.

The Robertshaw® Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment. Packaging includes special mounting adaptors.

Features and Benefits

Made from high-purity recrystallized silicon carbide. (Crystar™) which combines physical and thermal strength with stable electrical properties
Designed to reach ignition temperature(s) within 17 seconds
Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC

CAPACITOR, START, 233 – 280 MFD, 110V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-7/16 in

CAPACITOR, START, 460 – 552 MFD, 110V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-13/16 in

The Robertshaw® Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment. Packaged with special mounting adaptors.

Features and Benefits

Made from high-purity recrystallized silicon carbide. (Crystar™) which combines physical and thermal strength with stable electrical properties
Designed to reach ignition temperature(s) within 17 seconds
Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC

Robertshaw® offers direct replacements for several leading OEM brand ignitors. These ignitors are constructed with sturdy, long-lasting silicon nitride for maximum longevity. The Robertshaw 41-427N is a 120V Direct Replacement for Goodman 0130F00008 with a 6.19 inch wire and 2 inch insulator.

Cartridge Bearing; 1" Bore; 2-17/32" Outside Diameter; 1" Cartridge Housing Width; Concentric Collar; Cartridge Unit Housing; Rubber; Ball Bearing; 1.43" Length Thru Bore; Not Relubricatable; SLRB-116 Insert; Single Lip Contact Seal; Non-Expansion

The Robertshaw® Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment.

Features and Benefits

Made from high-purity recrystallized silicon carbide. (Crystar™) which combines physical and thermal strength with stable electrical properties
Designed to reach ignition temperature(s) within 17 seconds
Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC

CAPACITOR, START, 88 – 108 MFD, 330V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 2-1/16 in

Compact easy to use thermometer with large display.
315C Pocket Digital Thermometer

Auto field calibrate to ±2˚F in less than 10 seconds using ice water.
Field calibrate to ±2°F
Tapered stem (3.1 mm diameter) to fit into a Pete’s Plug
Reinforced, heavy-duty housing for strength
Waterproof (IP63)
Penetration tip
-58°F to 300°F (-50°C to 150°C)
Fits in your pocket
3-year limited warranty

The Robertshaw® Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment.

Features and Benefits

Made from high-purity recrystallized silicon carbide. (Crystar™) which combines physical and thermal strength with stable electrical properties
Designed to reach ignition temperature(s) within 17 seconds
Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC

CAPACITOR,START,161 – 193 MFD,110V

Type two, dry, electrolytic, non-polarized, types for intermittent duty in AC motors and compressors, standard dual blade terminals
Industry standard case sizes
Made at Supco in Nanchang. Jiangxi, China
Moisture and oil resistant molded phenolic resin or plastic material
Non-PCB biodegradable synthetic oil, used where starting torques must be higher in relation to running torques
Application Motors and Compressors
Outside Diameter 1-7/16 in

Inside release