This DOT-approved 50lb (22.68kg) recovery tank features a 1/4in SAE male fitting, a maximum pressure rating of 400psig and a water capacity of 47.7lbs (21.7kg).

Service kit (NC); O-ring, (4) screws, armature assembly, rubber gasket, compression spring

Harris® 30RZ PSI/2 BAR 50mm replacement pressure gauge has a black ABS plastic case, polycarbonate clear snap-in lens, steel dial and brass lower mount male stem with 1/8 in. BSP thread connection. Requires a mounting gasket - PN 9000643 (sold separately). The dual scale red and black markings on a white background makes it easy-to-read. This gauge is ideal for gas distribution to denote the pressure levels on regulators using acetylene. "Use No Oil" marking on dial face for clarification. This gauge is UL listed and meets ASME B40.1 standards.

Features
Black ABS plastic construction is lightweight while durable
50mm dial diameter
30RZ PSI / 2 BAR pressure rating
Easy-to-read white steel background with red and black markings
Snap-in polycarbonate clear lens
Brass 1/8 in. BSP threaded lower stem mount
Meets ASME B40.1 standards
UL listed
One year warranty
Gauge mount in requires a gasket - PN 9000643 (sold separately)

SWITCH, UNIV, AIR PRES, 14 IN W.C

Hardware kit included
Senses positive, negative or differential pressures

The Robertshaw® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit® models are factory set at 3.5” WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16” swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.

Features and Benefits
Gas cock dial marking Off - Pilot - On
Pilot outlet 1/4” tubing
Ambient temperature of -40°F to 175°F
Combination screw/spade terminal type
Maximum inlet pressure 14” WC (0.5 PSI)
Standard NEMA terminals
Inlet filtered screen
Various gas types: natural, manufactured, mixed, LP, and LP/air mixtures
Multiple actuators available
RoHS compliant

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)

Key Features:
• Lightweight (22.4 Lbs / 10.1 Kg)
• Compact, portable size (0.57 cu. ft.)
• 1 HP, variable speed, brushless DC motor
• 100 to 240VAC (50/60Hz) universal voltage
In-line 1/2″, 3/8″,1/4″ hose connection ports
Stores/operates in extreme temperatures
Auto shut-off solenoid valve
Analog vacuum gauge
Large vertical oil sight glass
Closed, hoist-type handle
15 Micron ultimate vacuum
Quiet Operation

Key Features:
• Lightweight (18.2 Lbs / 8.25 Kg)
• Compact, portable size (0.48 cu. ft.)
• 1/2 HP, variable speed, brushless DC motor
• 100 to 240VAC (50/60Hz) universal voltage
• In-line 1/2″, 3/8″,1/4″ hose connection ports
• Stores/operates in extreme temperatures
• Auto shut-off solenoid valve
• Analog vacuum gauge
• Large vertical oil sight glass
• Closed, hoist-type handle
• 15 Micron ultimate vacuum
• Quiet Operation

114N3587 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 5HP 1PH
Compressor power supply [V]: 230/1/60
OP-HRXM0500UWK000N

R448A/R449A Capacity range: 41710 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 5406W, AWEF 9.06

R404A/R507 Capacity range: 45690 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 5430W, AWEF 9.64

The J10 Series Humidistats and Dehumidistats are designed to regulate the relative humidity of confined spaces by cycling humidifying or dehumidifying equipment. Designed for central systems, the J10 controls are made from high impact plastic with a brushed finish dial plate. The J10's nylon sensing element provides long life and accurate humidity control. The J10-809W dehumidistat is designed to be wall mounted and can be wired in series or parallel with a 24 volt nonelectric thermostat.

Features and Benefits

Strong plastic frame with integral switch eliminates the need to ground the control
Improved woven nylon sensing element provides a faster response time
Greater stability in set points over dramatic changes in relative humidity
Improved differential allowing 5% relative humidity

The Robertshaw 1970 Series Thermocouple Uni-Couple® design allows for installation to virtually all pilot burners. The versatile zip nut may be pushed, pulled or threaded onto the thermocouple's rolled threads for proper positioning in every application.

Features and Benefits

Easy burner installation with attached threaded nut
Stainless steel outer jacket for long life and resistance to heat blistering
Combination of copper and nickel alloys for good electrical conductivity
Mica washer to insulate from shorting conditions
Tinnerman clip included
Various lengths available for multiple applications

A universal way to secure the disconnect to the unit, without blocking access to the electrical panel.

Features/Benefits

Designed to fit various layouts of single phase disconnects
Cross pattern mounting allows for universal installations
Hex nuts for easy installation with 5/16" nut driver
Eliminates potential damage to the unit during installation
Made of weather-resistant galvanized metal
Part of our SUPCO® TradeFox™ Technician-Invented product line

VALVE, BULLET, PIERCING, ZNC, 1/4 IN, 1/4

Corrosion resistant
Hex key wrench included
Non-positional mounting, no adapter valve required
Patented valve gasket provides 50 times more sealing area than competitive 'O' ring types
Piercing needle is engineered for concentricity and hardness to insure perfect seating every time, requires only 2 in clearance for installation and operation

Sil-Fos 5 is a silver-copper-phosphorus alloy for copper-copper brazing but can also be used to join brass with an appropriate flux (e.g. Handy Flux, Ultra Flux). It is a more cost effective Ag-Cu-P alloy, though it does not penetrate deep joints easily.
Joins CU to CU (phosphorus serves as flux)
Joins CU to Brass (flux is recommended)
Lower cost alternative to higher silver content Ag-Cu-P alloys
Medium flow
Made in USA
Industry Applications:
HVAC/R refrigerant systems, air conditioning coils, evaporator coils

SA Item ID: 92030012
Mfg Part Number: 33136


LucasMilhaupt® Sil-Fos® 5 31894 Brazing Rod, 0.94 in Dia x 20 in L, 24 Rod Plastic Tube, 30000 to 40000 psi Tensile
LucasMilhaupt® Sil-Fos® 5 Brazing Rod, 0.94 in Dia, 20 in Length, Plastic Tube, 30000 to 40000 psi Tensile, Chemical Composition: Silver, Copper, Phosphorus, 1325 to 1500 deg F Brazing

SWITCH, AIR, ADJ, PRES, 0.25 TO 1 IN W.C

Adjustable set points
Convenient kits for aftermarket installation
Factory set to activate on pressure rise

The SHL series of 1/2" bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design.

Features/Benefits

36T Electrical Ratings
CSA approved
Direct OEM replacements
Economical
L170-40 SPST
UL® recognized

114N3582 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 2.5HP 3PH
Compressor power supply [V]: 230/3/60
OP-HNXM0250UWK000Q

R448A/R449A Capacity range: 22000 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 3013W, AWEF 8.79

R404A/R507 Capacity range: 24040 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 2973W, AWEF 10.04

SGP - Sight Glasses
Danfoss sight glasses with hard crystal view ports are designed to accurately indicate the presence of moisture in refrigeration and airconditioning
systems. When system moisture content rises above permissible levels, the “dry/green” indicator will change to yellow indicating
a “wet” system. The indication of dangerous moisture levels is essential in helping prevent the formation of harmful acids which are detrimental
to the system. The SGP sight glass is simply the best-made sight glass available today.

SGP - Sight Glasses
Danfoss sight glasses with hard crystal view ports are designed to accurately indicate the presence of moisture in refrigeration and airconditioning
systems. When system moisture content rises above permissible levels, the “dry/green” indicator will change to yellow indicating
a “wet” system. The indication of dangerous moisture levels is essential in helping prevent the formation of harmful acids which are detrimental
to the system. The SGP sight glass is simply the best-made sight glass available today.

VALVE, BULLET, PIERCING, ZNC, 1/4 IN, 1/2

Corrosion resistant
Hex key wrench included
Non-positional mounting, no adapter valve required
Patented valve gasket provides 50 times more sealing area than competitive 'O' ring types
Piercing needle is engineered for concentricity and hardness to insure perfect seating every time, requires only 2 in clearance for installation and operation

Harris® 400 PSI/28 BAR 50mm replacement pressure gauge has a black ABS plastic case, polycarbonate clear snap-in lens, steel dial and brass lower mount male stem with 1/8 in. BSP thread connection. Requires a mounting gasket - PN 9000643 (sold separately). The dual scale black markings on a white background makes it easy-to-read. This gauge is ideal for gas distribution to denote the pressure levels on regulators using non-corrosive gas. "Use No Oil" marking on dial face for clarification. This gauge is UL listed and meets ASME B40.1 standards.

Features
Black ABS plastic construction is lightweight while durable
50mm dial diameter
400 PSI / 28 BAR pressure rating
Easy-to-read white steel background with black markings
Snap-in polycarbonate clear lens
Brass 1/8 in. BSP threaded lower stem mount
Meets ASME B40.1 standards
UL listed
One year warranty
Gauge mount in requires a gasket - PN 9000643 (sold separately)

SGP - Sight Glasses
Danfoss sight glasses with hard crystal view ports are designed to accurately indicate the presence of moisture in refrigeration and airconditioning
systems. When system moisture content rises above permissible levels, the “dry/green” indicator will change to yellow indicating
a “wet” system. The indication of dangerous moisture levels is essential in helping prevent the formation of harmful acids which are detrimental
to the system. The SGP sight glass is simply the best-made sight glass available today.

SGP - Sight Glasses
Danfoss sight glasses with hard crystal view ports are designed to accurately indicate the presence of moisture in refrigeration and airconditioning
systems. When system moisture content rises above permissible levels, the “dry/green” indicator will change to yellow indicating
a “wet” system. The indication of dangerous moisture levels is essential in helping prevent the formation of harmful acids which are detrimental
to the system. The SGP sight glass is simply the best-made sight glass available today.

UC C LP AIR 1F 115 1PH M STD S 1
Evap. Temp : 25 °F Mid. Temp
Voltage : 115/1/60

Service kit (NC); diaphragm assembly, O-ring, (4) screws, armature assembly, rubber gasket, support ring, compression ring

Model HMA J-15 heating tip is a single-piece all copper tip tube and tip combination specifically designed for oxygen-acetylene heating applications. This tip has metal-to-metal contact seats. Thread sealants are not required when used with genuine Harris mixers. Conveniently vacuum-packed for point-of-purchase display.

Features
Single-piece tip-tube and rosebud tip combination
Copper construction
Specifically used for oxy-acetylene heating applications
Tip has metal-to-metal contact seats
Thread sealants not required when used with genuine Harris mixers
Marked with Harris logo and tip size for easy identification
One year warranty
Conveniently packaged for point-of-purchase display

The ETC-0030 is a 24V AC center-tapped transformer rated at 30VA, built to power 1–2 Multiflex boards such as the 16AI (810-3013), 8RO (810-3006), 8DO (810-3050), and 4AO (815-3030). Compatible with 115VAC and 230VAC primary inputs, it features a foot mount design and is UL approved for dependable performance in HVAC-R and energy management systems.