Bold Fasteners 8 3/4

This mini tube cutter features patented Set and Cut technology that provides easy tube cutting with little or no readjustment required.
Mini Tube Cutter 1/8″ to 7/8″

The 10-681 flame sensor is identical to Carrier/BDP part number LH33WZ511. The 10-681 is used in a system with the 41-409 hot surface ignitor.

Specifications

Replaces LH33WZ511

This premium-grade tube cutter has a quick-slide feature and a 3/8 to 2-5/8in outside diameter.

This ratchet tube cutter features patented Set and Cut technology that provides easy tube cutting with little or no readjustment required.

CU CC SCRL 0.8HP 208-230/1/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/1/60
Application Capacity* : 8,980 BTU/H
Refrigerant Type : R404A
AWEF Value : 7.6

Service kit (NC); diaphragm assembly, O-ring, (4) screws, armature assembly, rubber gasket, compression spring

3G – SUS 150 VISCOSITY (3GS EQUIVALENT).
Premium Quality.
Compatible with CFC, HCFC and Ammonia Refrigerants.
Low pour point and wax content.
High chemical and thermal stability.
30 cSt viscosity.

SSN2533--Silicon Nitride Ignitor replaces Heil Quaker (ICP) 1172533

This Igniter is used on many ArcoAire®, Comfortmaker®, Heil®, Tempstar®, and Whirlpool® furnaces.

CU CC SCRL 2.0HP 208-230/1/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/1/60
Application Capacity* : 16,410 BTU/H
Refrigerant Type : R448A
AWEF Value : 7.6"

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp, up to 6.8 Amps.
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

Seal kit (NC/NO); O-ring for armature tube, rubber gasket, support ring

KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits – allowing for maximum productivity and safety for you and your employees. With KleenGuard™ Nemesis™ Safety Glasses, you get sleek, modern eyewear with durable, lightweight construction. That is just one of the reason why millions of people wear them for protection both at work and at home. KleenGuard™ Nemesis™ Safety Glasses have polycarbonate lenses that provide 99.9% UVA/ UVB/UVC protection to help prevent eye damage like cataracts, retinal damage, and other conditions that can cause temporary vision loss. The wraparound frame has a base curve of 8 that extends the range of peripheral protection, as well as soft touch temples for comfort. KleenGuard™ Nemesis™ Safety Glasses have a patented nose piece designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose – all for long-term comfort. Each pair of KleenGuard™ Nemesis™ Safety Glasses come with a neck cord for securing them, so that the glasses are ready to protect at a moment's notice. The safety eyewear is manufactured to comply with the ANSI/ISEA Z87.1+ standard for personal eye protection. Both men and women will find these stylish glasses to be comfortable and functional for construction, manufacturing, gun shooting/shooting range, and a host of other industries. In addition, these safety glasses are recyclable through The RightCycle™ Program is the first manufacturer-led PPE recycling program. Remember: comfort and style drive compliance, so it pays to provide comfortable designer glasses that your staff will be proud to wear. Making the right Personal Protection choice is difficult. Perform with distinction with KleenGuard™ Personal Protective Equipment (PPE).

KleenGuard™ V30 Nemesis™ Safety Glasses; Blue Lenses with Mirror coating; Black Frame; Unisex Eyewear for Men and Women
Features a modern sleek and stylish lightweight design that your employees will be happy to wear; available in a variety of frame colors, lens colors and premium lens coatings for better performance and longer life
Polycarbonate lenses provide 99.9% UVA/UVB/UVC protection; meets the ANSI Z87.1+ standards
Designed to be extremely flexible, channel sweat away from the eyes, and help prevent slippage down the nose – all for long-term comfort
Recyclable through The RightCycle™ Program, the first manufacturer-led PPE recycling program.

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/12 to 1/5 hp, up to 4.05 Amp max.
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

The HT-VCL-30P 115 Volt high-temperature condensate removal pump with 1-gallon collection tank is designed for plenum applications with the capability to handle the most difficult commercial applications.

Model B15-3HV is an E-equal or positive pressure mixer for light-duty brazing and welding with all fuel gases. This model has a mixer-to-tip tube thread size of 5/16 in. - 27. Its welding capacity is 1/2 in. (12.7mm) plate and it heats up to 60,000 BTU. Typical applications include metal art, maintenance, production brazing, etc. Conveniently vacuum-packed for point-of-purchase display.

Features
Brass light-duty mixer
E-equal or positive pressure mixer
For use with all fuel gases
5/16 in. - 27 mixer-to-tip tube thread size
Thread sealants not required when used with genuine Harris mixers
Welds up to 1/2 in. (12.7mm) plate;Heats up to 60,000 BTU
Typical applications include metal art, maintenance, production brazing, etc.
Engraved with model number for easy identification

Model HA-3i Inferno® air-fuel quick connect swirl tip has a specially-designed insert that delivers reliable swirl combustion performance every time. It provides a consistently hotter flame that will engulf and wrap around the work-piece for maximum efficiency. It is constructed from thick and strong 304 stainless steel tube stock designed to be durable and long-lasting. The tip works and integrates with today's existing quick-connect air-fuel handles allowing contractors to simply and quickly connect to their existing torch handles using acetylene.

Features
Quick connect swirl tip with A-hose connections for brazing and soldering with air/acetylene
Constructed from thick and strong 304 stainless steel tube stock and brass for longer service life
The unique swirl combustion design provides a consistent, hotter flame that engulfs and wraps around the work-piece for maximum efficiency
Every tip is tested twice - once to ensure the perfect orifice and again to ensure the flame quality
The exacting manufacturing standards used to develop this tip ensures the optimal delivery of fuel gas resulting in the perfect flame
Designed to work and integrate with existing quick-connect air fuel handles for efficiency and increased productivity
Tips are configured to produce reliable and repeatable flame performance and are evaluated using thermal photography techniques
Use with air-fuel/acetylene
Marked with Harris logo and tip size for easy identification