CAPACITOR, RUN, RND DUAL, 45+5 MFD, 440V

10,000 AFC pressure sensitive short circuit interrupting capability
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85°C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures, PCB-free oil to prevent over-heating
Meets EIA-456A accelerated life test at 70°C for 60,000 hours
US and Canada UL Approved (C22.2NO.190)
Outside Diameter 1.97 in

CONTACTOR, 24V, 30A, 1.5, 40A, #10-32 SCREWS

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low drop out voltage making them ideal for any air conditioning heating and refrigeration application

SWITCH, PRES, 1/4 IN, 6VDC, 12VDC, 36VDC

1/4 in SAE 45 deg female flare fitting with valve core depressor
Automatic reset, high pressure switch opens on pressure rise
Life at rated load 100000 cycles
Small size and light weight for direct mounting, snap acting stainless steel hermetically sealed sensor, wire is 18 AWG, 18 in long
Frequency Rating 50/60 Hz
Nominal Size 1/4 in

CONTACTOR, 3 PL, BX LUG, 50A, 24V, 40A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

The Robertshaw® Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment. Packaged with special mounting adaptors.

Features and Benefits

Made from high-purity recrystallized silicon carbide. (Crystar™) which combines physical and thermal strength with stable electrical properties
Designed to reach ignition temperature(s) within 17 seconds
Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC

Universal round silicon nitride igniter kit. Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters

Rated Voltage: 120V +10% -15%, 50/60 Hz
Cold Resistance: 9 to 17 Ohms
Temperature @ 102V +/-5V: 1976°F / 1080°C
Temperature @ 120V +/- 5V: 2156°F / 1180°C
Steady State Current: 0.8 to 2.0 Amps Maximum @ 120 Volts
Igniter Material: Silicon_Nitride
Probe Length from Bracket: 2.25 Inches
Wire Length: 15.5 Inches

SUPCO® Cooper Driers are high quality, high capacity original equipment components for use on domestic and commercial refrigerators, freezers, and air conditioners.

Features/Benefits

100% XH-9 Beaded Molecular Sieve
Compatible with all refrigerants (including R290 & R600A)
Copper shells and end tubes
Easy break off grooved ends
Hermetically sealed
High capacity

CONTACTOR, 3 PL, BX LUG, 75A, 240V, 60A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration

Harris® 400 PSI/28 BAR 50mm replacement pressure gauge has a black ABS plastic case, polycarbonate clear snap-in lens, steel dial and brass lower mount male stem with 1/8 in. BSP thread connection. Requires a mounting gasket - PN 9000643 (sold separately). The dual scale black markings on a white background makes it easy-to-read. This gauge is ideal for gas distribution to denote the pressure levels on regulators using non-corrosive gas. "Use No Oil" marking on dial face for clarification. This gauge is UL listed and meets ASME B40.1 standards.

Features
Black ABS plastic construction is lightweight while durable
50mm dial diameter
400 PSI / 28 BAR pressure rating
Easy-to-read white steel background with black markings
Snap-in polycarbonate clear lens
Brass 1/8 in. BSP threaded lower stem mount
Meets ASME B40.1 standards
UL listed
One year warranty
Gauge mount in requires a gasket - PN 9000643 (sold separately)

Oatey® 4-In-1 Brush is designed with long-lasting, high-carbon steel brushes for cleaning the outside dameter of copper or plastic tube.

SWITCH, PRES, 1/4 IN, 6VDC, 36VDC, 18 AWG

1/4 in SAE 45 deg female flare fitting with valve core depressor
Automatic reset, high pressure switch opens on pressure rise
Life at rated load 100000 cycles
Small size and light weight for direct mounting, snap acting stainless steel hermetically sealed sensor, wire is 18 AWG, 18 in long
Frequency Rating 50/60 Hz
Nominal Size 1/4 in

Compact easy to use thermometer with large display.
315C Pocket Digital Thermometer

Auto field calibrate to ±2˚F in less than 10 seconds using ice water.
Field calibrate to ±2°F
Tapered stem (3.1 mm diameter) to fit into a Pete’s Plug
Reinforced, heavy-duty housing for strength
Waterproof (IP63)
Penetration tip
-58°F to 300°F (-50°C to 150°C)
Fits in your pocket
3-year limited warranty

CONTACTOR, 3 PL, BX LUG, 50A, 120V, 40A

Economically priced
Interchangeable mounting with many competitive contactors
Silver cadmium oxide contacts
Space saving dimensions allow for smaller panels and more wiring room
Application Low Drop Out Voltage Making them Ideal for Any Air Conditioning Heating and Refrigeration