Brass tank adaptor connects a cylinder to a regulator. For CGA 520 "B" acetylene to CGA 200 "MC acetylene connections. Adaptors should not be used for permanent installations.

Features
Brass construction
Connects "B" acetylene tank to MC acetylene regulator
For use with acetylene

These black disposable Grease Monkey gloves protect hands for brief exposure periods. They are powder-free, their thickness is eight mils and they are 11 inches long. Their size is medium, and they come in a pack of 50 to be used in clinics and other settings.

This premium hose with a 45° ball valve controls the flow of refrigerant with just a quarter-turn.

The Paragon® 8000 Series Commercial Defrost Controls are designed for commercial freezers and refrigerators to provide automatic defrost capability. They accommodate various types of defrost systems including electric defrost heaters, hot gas, and compressor off cycle.

Features and Benefits

Time initiated; temperature, pressure or time terminated models available
High-amp switch contacts: 40 Amps, 2 HP
Positive slider bar switch design assures positive electrical contact and wipes the contact surface of contaminates
Temperature or pressure terminated models are designed for defrost termination using an external temperature or pressure device
Safety back-up - mechanical time-driven defrost termination
Heavy-duty synchronous design drive motor
Choice of three contact arrangements
Adjustable frequency of defrost initiation from 1 to 6 cycles per day with a minimum of 4 hours between successive operations
Adjustable back-up defrost termination from 4 to 110 minutes in 2 minute increments
Heavy-duty steel enclosure with knockouts (on the bottom, back and sides) and hasp and staple padlock
All 8240 models have an adjustable cut-in pressure dial calibrated from 36-110 pounds for R12, R22, R502

Harris® 30RZ PSI/2 BAR 50mm replacement pressure gauge has a black ABS plastic case, polycarbonate clear snap-in lens, steel dial and brass lower mount male stem with 1/8 in. BSP thread connection. Requires a mounting gasket - PN 9000643 (sold separately). The dual scale red and black markings on a white background makes it easy-to-read. This gauge is ideal for gas distribution to denote the pressure levels on regulators using acetylene. "Use No Oil" marking on dial face for clarification. This gauge is UL listed and meets ASME B40.1 standards.

Features
Black ABS plastic construction is lightweight while durable
50mm dial diameter
30RZ PSI / 2 BAR pressure rating
Easy-to-read white steel background with red and black markings
Snap-in polycarbonate clear lens
Brass 1/8 in. BSP threaded lower stem mount
Meets ASME B40.1 standards
UL listed
One year warranty
Gauge mount in requires a gasket - PN 9000643 (sold separately)

The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

Controls available for most refrigerant types
High-amp rated switch (SPST) design (O10-1402/O10-1483)
Super Cap® capillary vibration protection system
Non-conductive front cover with captive screw
Adjustable differential and range
Easy-to-read scale plate
Vibration cone (absorbs and reduces vibration away from brazed joint)
Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)
The O16-624 control has additional features:

Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A
Cap included on all Australia temperature controls. Optional for all other regions

Single-Component, Acetoxy Silicone Sealant
Tremsil® 200 is a single-component, acetoxy silicone sealant. Tremsil 200 cures to a flexible rubber when exposed to moisture present in the air.

Basic Uses
Tremsil 200 produces a weathertight seal to glass, metal, porcelain, ceramic and most painted surfaces.
Tremsil 200 sealant is suitable for use in kitchens, bathrooms and spas.

This mini tube cutter features patented Set and Cut technology that provides easy tube cutting with little or no readjustment required.
Mini Tube Cutter 1/8″ to 7/8″

The Ranco® A12 and 9531 Series Constant Cut-in Temperature Controls are designed to switch electrical components of refrigeration systems in response to sensed temperatures.

Features and Benefits

Laser-welded stainless steel bellows
Fixed or adjustable temperature settings
High-amperage contacts
Pneumatic action provided by vapor-filled capillary or capillary with bulb sensing elements
Constant On or Off positions available
Choice of mounting brackets, adjustment ranges and cams, and slotted or flatted shafts
Standard 1/4” quick-connect terminals with optional screw terminals

The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

Controls available for most refrigerant types
High-amp rated switch (SPST) design (O10-1402/O10-1483)
Super Cap® capillary vibration protection system
Non-conductive front cover with captive screw
Adjustable differential and range
Easy-to-read scale plate
Vibration cone (absorbs and reduces vibration away from brazed joint)
Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)
The O16-624 control has additional features:

Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A

1 HP 220V, 1Ph, 1625W, 7.4Amps (Capacity - 8ft x 10ft x 8ft), 5800 BTU

The Paragon® 8000 Series Commercial Defrost Controls are designed for commercial freezers and refrigerators to provide automatic defrost capability. They accommodate various types of defrost systems including electric defrost heaters, hot gas, and compressor off cycle.

Features and Benefits

Time initiated; temperature, pressure or time terminated models available
High-amp switch contacts: 40 Amps, 2 HP
Positive slider bar switch design assures positive electrical contact and wipes the contact surface of contaminates
Temperature or pressure terminated models are designed for defrost termination using an external temperature or pressure device
Safety back-up - mechanical time-driven defrost termination
Heavy-duty synchronous design drive motor
Choice of three contact arrangements
Adjustable frequency of defrost initiation from 1 to 6 cycles per day with a minimum of 4 hours between successive operations
Adjustable back-up defrost termination from 4 to 110 minutes in 2 minute increments
Heavy-duty steel enclosure with knockouts (on the bottom, back and sides) and hasp and staple padlock
All 8240 models have an adjustable cut-in pressure dial calibrated from 36-110 pounds for R12, R22, R502

The J10 Series Humidistats and Dehumidistats are designed to regulate the relative humidity of confined spaces by cycling humidifying or dehumidifying equipment. Designed for central systems, the J10 controls are made from high impact plastic with a brushed finish dial plate. The J10's nylon sensing element provides long life and accurate humidity control. The J10-821 humidistat can be wall mounted or installed directly in a cold air return duct.

Features and Benefits

Strong plastic frame with integral switch eliminates the need to ground the control
Improved woven nylon sensing element provides a faster response time
Greater stability in set points over dramatic changes in relative humidity
Improved differential allowing 5% relative humidity

Harris® 400 PSI/28 BAR 50mm replacement pressure gauge has a black ABS plastic case, polycarbonate clear snap-in lens, steel dial and brass lower mount male stem with 1/8 in. BSP thread connection. Requires a mounting gasket - PN 9000643 (sold separately). The dual scale black markings on a white background makes it easy-to-read. This gauge is ideal for gas distribution to denote the pressure levels on regulators using non-corrosive gas. "Use No Oil" marking on dial face for clarification. This gauge is UL listed and meets ASME B40.1 standards.

Features
Black ABS plastic construction is lightweight while durable
50mm dial diameter
400 PSI / 28 BAR pressure rating
Easy-to-read white steel background with black markings
Snap-in polycarbonate clear lens
Brass 1/8 in. BSP threaded lower stem mount
Meets ASME B40.1 standards
UL listed
One year warranty
Gauge mount in requires a gasket - PN 9000643 (sold separately)

One PHLiPBiT replaces 2 singles, reduces inventory, saves time & money. Drive more screws, faster & easier with less strip out.

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp, up to 6.8 Amps.
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/12 to 1/5 hp, up to 4.05 Amp max.
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

Carrying stand for "B" acetylene tank. This model is constructed of enameled steel making it sturdy, yet portable. The convenient utility tray and air/fuel handle holder provides easy storage of tips, handle, hose and striker.

This solenoid valve troubleshooting magnet is a must-have tool that manually opens solenoid valves by lifting its stem and plunger using an industrial-grade magnet housed inside of durable ABS plastic.

Product Features
Multi-Grade Oil Compatible with A/C Systems using 1234yf or R134a refrigerant
Safe for hybrid & electric compressors
Complete additive package
Contains UV Dye for Leak Detection
68 cSt viscosity

A/C DRAIN LINE CLEANER.
HELPS PREVENT COSTLY WATER DAMAGE CAUSED BY CLOGGED A/C CONDENSATE DRAINS.
Prevents clogs and build-up by loosening and removing mold, mildew, scum and water deposits in A/C & refrigeration drain pans, lines & pumps.
Safe for drain pipes, pumps and pans, is non-corrosive.
Ready to use liquid allows application in difficult to access condensate pans and lines.
When used regularly helps prevent further build-up.
Treats up to a 4-Ton unit.

Highside® Leak Lock is a state-of-the-art high strength, pipe joint sealant consisting of chemically resistant film formers, plasticizers, reinforcing fillers and solvents, useable on all clean metal or plastic surfaces.

Features/Benefits

1⅓ ounce tube
For use with pressures ranges from full vacuum to 10,000 PSI
Ideal for joining metals, plastics and other materials
Never hardens and never becomes brittle
Non-toxic
Sticks to all clean surfaces