CU BN SCRL 7.5HP 575/3/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10.0 °F
Voltage : 575/3/60
Application Capacity* : 31,350 BTU/H
Refrigerant Type : R448A
AWEF Value : 3.15

This 1-piece MICRO-SEAL™ quick coupler hose adapter features 1/4in SAE female x 1/4in SAE male connectors with a 45° female design.

The slim design 285 is a hand-held, auto ranging clamp-on DMM with Bluetooth output for use with the TPI View app. Backlit dual display, True RMS response, Frequency with Duty Cycle, Min/Max/Avg, Temperature, Inrush Current measurement, Capacitance, DC microamps, and Non-Contact Voltage detection are just a few of the features of the 285.

The TPI View app can be used in conjunction with the 285 to store measurements to jobs, create and email test reports, view live readings from a safe distance, or print measurements to the optional A711BT printer.

True RMS for accurate voltage and amperage measurements
In-Rush Current measurement to capture motor start up current
Non-Contact Voltage detection through the jaw
Bluetooth LE communication
Use with TPI View app to display live readings, save measurements, create and email reports with GPS tagged date and time
CATIV 600V rated for safety

BRUSH, COIL, REFRIGERATION, 27-1/2 IN

1-1/2 in and 3/4 in bristle length
12 in brush length
27-1/2 in long
Wood Handle

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

22-18 AWG ¼" (.250") Male/Female P.B. 10 Pieces

The SUPCO® Universal ECM Tester provides functional test for virtually all types of Electronically Commutated Motors on the market.

TESTER, UNIV, ECM, 24VAC, 24 IN

24 in leads and magnetic case for job-site convenience
24 VAC indicator light, short circuit protection
Easy to use - gives a in Go/No-Go in result
No batteries required
Part of our Supco TradeFox™ Technician-Invented product line

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired

Features/Benefits

Can be used with and without start capacitor motors from 1/4 to 1/3 hp
Locked rotor protection eliminates start winding overheating
RO series features "snap-on" bracket
UL® Recognized

MaterialAluminum, Zinc coated steel ConstructionOne-piece; hubbed, hubless, or unit-bearing

This titanium-plated cutting wheel is for use with BTC400 and 500 units.

Robertshaw® offers direct replacements for several leading OEM brand ignitors. These ignitors are constructed with sturdy, long-lasting silicon nitride for maximum longevity. The Robertshaw 41-427N is a 120V Direct Replacement for Goodman 0130F00008 with a 6.19 inch wire and 2 inch insulator.

CU CC SCRL 3.0HP 208-230/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/3/60
Application Capacity* : 31,930 BTU/H
Refrigerant Type : R404A
AWEF Value : 7.6

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping.

Features/Benefits

100 % helium and hydrogen leak tested
Compatible with all refrigerants
Deep pitch stainless steel hose and high tensile wire braid
Unique proven design for high pressure applications rated for R410A

The 1095 Series Spring Action Bright Chrome Steel Door Closer Operates by Direct Force Adding to Natural Swing Momentum of Closing Door. The 1095 is Designed to Overcome Slowing Action of Gaskets and Air Pressure, Providing Fast, Full Closure for Heavy Walk-in Doors. This Closer is an Ideal Complement for Kason Walk-in Door Hardware to Provide Self-Closing Doors

DISCONNECT,QUICK,HT,600V,16-14 AWG,100PC

16-14 AWG 1/4 in (0.250 in) female x 90° flag 100 pieces
For higher temperatures - up to 900°F

This offset service wrench features a chrome finish and 3/16in, 1/4in, 5/16in and 3/8in offset square drives, plus a hex adapter.

Supco® terminal service packs are handy and low priced, ideal for small jobs.

Features/Benefits

16-14 AWG ¼" (.250") Male Fully Insulated 10 Pieces

The SLS series of 1/2" bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design.

Features/Benefits

Auto reset
CSA approved
Offered in a broad temperature range to cover most heating applications
UL® recognized

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping.

Features/Benefits

100 % helium and hydrogen leak tested
Compatible with all refrigerants
Deep pitch stainless steel hose and high tensile wire braid
Unique proven design for high pressure applications rated for R410A

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping.

Features/Benefits

100 % helium and hydrogen leak tested
Compatible with all refrigerants
Deep pitch stainless steel hose and high tensile wire braid
Unique proven design for high pressure applications rated for R410A

Run capacitors for use in Mini Split applications.

Features/Benefits

Meets IEC 252 Standard
Plastic construction
Quad blade quick connect terminals
UL recognized

Time Delay on Break Timers (DOB)

Features/Benefits

1/4" male quick connect terminals
Adjustable time delay on break relay 6 seconds to 5 minutes
Cannot be used with a cooling anticipator
Delay on Break Timers (DOB)

The SRL series of 1/2" bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design.

Features:

Manual reset
UL recognized
CSA approved
Uses 36T electrical ratings

Run capacitors for use in Mini Split applications.

Features/Benefits

Meets IEC 252 Standard
Plastic construction
Quad blade quick connect terminals
UL recognized

Model HA-14i Inferno® air-fuel quick connect swirl tip has a specially-designed insert that delivers reliable swirl combustion performance every time. It provides a consistently hotter flame that will engulf and wrap around the work-piece for maximum efficiency. It is constructed from thick and strong 304 stainless steel tube stock designed to be durable and long-lasting. The tip works and integrates with today's existing quick-connect air-fuel handles allowing contractors to simply and quickly connect to their existing torch handles using acetylene.

Features
Quick connect swirl tip with A-hose connections for brazing and soldering with air/acetylene
Constructed from thick and strong 304 stainless steel tube stock and brass for longer service life
The unique swirl combustion design provides a consistent, hotter flame that engulfs and wraps around the work-piece for maximum efficiency
Every tip is tested twice - once to ensure the perfect orifice and again to ensure the flame quality
The exacting manufacturing standards used to develop this tip ensures the optimal delivery of fuel gas resulting in the perfect flame
Designed to work and integrate with existing quick-connect air fuel handles for efficiency and increased productivity
Tips are configured to produce reliable and repeatable flame performance and are evaluated using thermal photography techniques
Use with air-fuel/acetylene
Marked with Harris logo and tip size for easy identification

MaterialAluminum, Zinc coated steel ConstructionOne-piece; hubbed, hubless, or unit-bearing

WALK-IN FREEZER DOOR - 4" THICK
34" X 78" / 3LH 3RH SWING / 'L' FRAME
WITH BACKING, HARDWARE, DOOR CLOSER, KASON HINGES, &
ALUM CHECKER PLATE ON EXTERIOR ONLY
FOR 4" FLOOR / 4" WAL

DISCONNECT,QUICK,HT,600V,12-10 AWG,100PC

12-10 AWG 1/4 in (0.250 in) female Tab 100 pieces
For higher temperatures - up to 900°F

CU CC SCRL 1.5HP 208-230/3/60 MED
Ambient Temp : 95 °F
Suction Temp : 25 °F
Voltage : 208-230/3/60
Application Capacity* : 17,540 BTU/H
Refrigerant Type : R404A
AWEF Value : 7.6