This pocket-size valve core and SAE brass cap kit includes 6 premium 1/4in valve cores and a valve core remover/installer in a small clear plastic tube.

CAPACITOR, OVLD, RLY, 110 TO 125VAC, 115V

Designed for modern high efficiency compressors, easy mount clip for quick installation
For systems with or without run capacitors
Helps older compressors start and run cooler
Prevents low voltage starting problems
Wire designations - white/start, black/common, red/run

These 1/4in premium valve cores come in a pack of 100.

With the TPI A605 Tapered T Fitting for Manometers, you can measure pressure with your compatible TPI manometer or combustion analyzer. The T fitting is tapered and measures 0.25" (6.35 mm).

Features

Compatible with TPI 610, 615, 620 and 625 manometers (sold separately)
For use when performing pressure measurements or setting pressure switches

This 1-piece MICRO-SEAL™ quick coupler hose adapter features 1/4in SAE female x 1/4in SAE male connectors with a 90° female design.

The ETC-1125 Blue Temperature Sensor is designed for precise coil inlet temperature monitoring in evaporators. Compatible with Emerson / Copeland / CPC part number 501-1125 and Parker part number 023-0076. Identical to the Emerson / Copeland / CPC part number 501-1125 and Parker / Micro Thermo Technologies™ part number 023-0076.

This adapter features a 3/8in SAE Male x 1/4in SAE Female connection.

Silicone pressure tubing
For combustion analyzer and digital manometers
6' Length

Test Leads with Threaded Tips and Screw on Alligator Clips.

This adapter features 14mm Male x 1/4in SAE Male connectors.

CAPACITOR, OVLD, RLY, 110 TO 125VAC, 115V

Designed for modern high efficiency compressors, easy mount clip for quick installation
For systems with or without run capacitors
Helps older compressors start and run cooler
Prevents low voltage starting problems
Wire designations - white/start, black/common, red/run

This 1-piece MICRO-SEAL™ quick coupler hose adapter features 1/4in SAE female x 1/8in FPT connectors.

This pack of 3 MICRO-SEAL™ quick coupler hose adapters feature 1/4in SAE female x 1/4in SAE male connectors with a straight design.

These 1/4in premium valve cores come in a pack of 25.

Surge Protective Device, 240 VAC 1Ph w/Green Ground Lead, Type 1 or Type 2, Outdoor, Connected Equipment Warranty 3yr $7,500

This 1-piece MICRO-SEAL™ quick coupler hose adapter features 1/4in SAE female x 1/4in SAE male connectors with a 45° female design.

This adapter features a 3/4in-14 x 1/4in SAE Male connection and works with 125lb (56.7kg) tanks.

CAPACITOR, OVLD, RLY, 110 TO 125VAC, 115V

Designed for modern high efficiency compressors, easy mount clip for quick installation
For systems with or without run capacitors
Helps older compressors start and run cooler
Prevents low voltage starting problems
Wire designations - white/start, black/common, red/run

These 1/4in premium valve cores come in a pack of 10.

MICRO LEAK DETECTOR
The Original Big Blu leak detector is used by OEM’s and industry professionals worldwide. This is the only bubble solution capable of detecting gas leakage down to 0.65 ounces per year. Use on any gas including Oxygen.
NSF certified for use around food
Non-Corrosive
Detects Micro Leaks down to 0.65 oz/year
Safe of any type of gas

MICRO LEAK DETECTOR
This is our original Big Blu microleak detector downsized into a Brush On applicator. This product is great for spot leak applications and is supplied with a 10 inch extension dauber.
NSF certified for use around food
Non-Corrosive
Detects Micro Leaks down to 0.74 oz/year
Safe on any type of gas

Pilot service kit (NC); (2) Al. gaskets, O-ring, orifice, armature tube, armature assembly, compression spring

• 46 available pockets
• V-SWAP™ removable tool pocket panel system
• Includes rear tablet pocket & 2 padded meter pockets
• “Hang-up” hook - accessible while open and closed
• Over-molded rubber grip
• Padded shoulder strap
• YKK® zippers
• Waterproof Polypropylene plastic base
• Tablet pocket dimensions: 11"H x 9"W x 1"D
• 5 year Limited Warranty

CU CC SCRL 2.5HP 208-230/1/60 LOW
Ambient Temp : 95 °F
Suction Temp : -10 °F
Voltage : 208-230/1/60
Application Capacity* : 11,970 BTU/H
Refrigerant Type : R404A
AWEF Value : 3.15

Your team works tirelessly to ensure that every piece of machinery operates at peak efficiency, but interruptions due to retensioning result in costly downtime.
With Gates first maintenance-free premium V-belt, you're investing in a long-lasting solution that eliminates retensioning downtime and reduces replacement cycles, allowing your team to focus on the job without interruptions.
Featuring up to a 30% increase in power rating, Quad-Power 4 is engineered to offer next-gen torque capacity and optimize power transfer with unparalleled efficiency. The minimal-stretch cord technology of the belt reduces tension decay and delivers up to 200%* longer belt life and exceptional wear resistance, even in extreme temperatures.
Quad-Power 4 meets ARPM IP-3-3 and ISO 1813 static-conductivity standards, as well as ARPM IP-3-2 for oil and chemical-resistance standards.

RECOMMENDED FOR: high-horsepower and heavy-duty applications where durability and performance are crucial. These belts are commonly used in large facilities HVAC systems, agricultural equipment, food processing machinery and deep freeze warehouses, truck and bus accessory drives, and highway repair equipment.
FOR USE WITH: ARPM and ISO standard V-belt pulleys.

The Robertshaw® 712 Series Intermittent Pilot Ignition System Kit features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Caution: Do not use on LP gas applications.

Features and Benefits

Quick and easy installation
Complete in-depth instructions and trouble shooting information
Used on natural gas systems only

Your team works tirelessly to ensure that every piece of machinery operates at peak efficiency, but interruptions due to retensioning result in costly downtime.
With Gates first maintenance-free premium V-belt, you're investing in a long-lasting solution that eliminates retensioning downtime and reduces replacement cycles, allowing your team to focus on the job without interruptions.
Featuring up to a 30% increase in power rating, Quad-Power 4 is engineered to offer next-gen torque capacity and optimize power transfer with unparalleled efficiency. The minimal-stretch cord technology of the belt reduces tension decay and delivers up to 200%* longer belt life and exceptional wear resistance, even in extreme temperatures.
Quad-Power 4 meets ARPM IP-3-3 and ISO 1813 static-conductivity standards, as well as ARPM IP-3-2 for oil and chemical-resistance standards.

RECOMMENDED FOR: high-horsepower and heavy-duty applications where durability and performance are crucial. These belts are commonly used in large facilities HVAC systems, agricultural equipment, food processing machinery and deep freeze warehouses, truck and bus accessory drives, and highway repair equipment.
FOR USE WITH: ARPM and ISO standard V-belt pulleys.