Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning, heat pump and refrigeration systems to dampen the transmission of compressor induced vibration through the system piping.

Features/Benefits

100 % helium and hydrogen leak tested
Compatible with all refrigerants
Deep pitch stainless steel hose and high tensile wire braid
Unique proven design for high pressure applications rated for R410A

This manifold and gauge set features triple-seal piston valves and sure-grip rubber over metal valve handles.

RL 32-3MAF APPROVED FOR COPELAND® BRAND PRODUCTS.
Formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants.
Polyol Ester (POE) lubricant for use with R32, R-134a, R-404A, R407C, R410A, R-448A, R-449A, R507; HCFC, HFO & blends, and Natural Refrigerants – CO2 and Hydrocarbons.
Excellent thermal and chemical stability and is compatible with a wide range of elastomers, polymeric materials and other materials of construction.
Provides effective wear protection for steel and aluminum surfaces for increased system life & efficiency.
Compatible with mineral oils, alkylbenzenes and PAG’s.
33 cSt viscosity.

114N3587 OPTYMA™ OUTDOR SLIM (LOW AMBIENT KIT) MED 5HP 1PH
Compressor power supply [V]: 230/1/60
OP-HRXM0500UWK000N

R448A/R449A Capacity range: 41710 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 5406W, AWEF 9.06

R404A/R507 Capacity range: 45690 BTU/hr (Ambient Temp. = 95°F , evaporating temperature =25°F), Power consumption 5430W, AWEF 9.64

Highside® TRACE2 is a red, fluorescent tracer leak detector for refrigeration, air conditioning and hydraulic systems. It is a concentrated dye with a fluorescent additive in a Polyolester lubricant base.

Features/Benefits

4 ounce plastic bottle
Clearly visible, even through ice and frost
Compatible with all refrigerants and lubricants, old and new
Fluorescent under ultraviolet light
Leaks show as bright red stains
Locates leaks exactly, no false positives
Non-volatile, will not sludge or deposit gum
Polyol Ester base
Use ⅛ oz. per pound of refrigerant
Use to locate the hardest to find leaks under the toughest conditions

SUPCO® Cooper Driers are high quality, high capacity original equipment components for use on domestic and commercial refrigerators, freezers, and air conditioners.

Features/Benefits

100% XH-9 Beaded Molecular Sieve
Compatible with all refrigerants (including R290 & R600A)
Copper shells and end tubes
Easy break off grooved ends
Hermetically sealed
High capacity

The Ranco® O Series Single Low Pressure Controls offer a variety of pressure ranges and switch action to provide maximum application flexibility.

Features and Benefits

Controls available for most refrigerant types
High-amp rated switch (SPST) design (O10-1402/O10-1483)
Super Cap® capillary vibration protection system
Non-conductive front cover with captive screw
Adjustable differential and range
Easy-to-read scale plate
Vibration cone (absorbs and reduces vibration away from brazed joint)
Low mass copper alloy capillary tube (reduces capillary stress caused by equipment vibration)
The O16-624 control has additional features:

Compatible with refrigerants 134A, 401A, 401B, 402A, 402B, 403A, 403B and 404A

The 10-681 flame sensor is identical to Carrier/BDP part number LH33WZ511. The 10-681 is used in a system with the 41-409 hot surface ignitor.

Specifications

Replaces LH33WZ511

High Powered LED Blue light leak detection lamp.
Illuminates fluorescent dyes brilliantly.
High intensity beam makes even small leaks visible and is bright enough to be used in low light as well as daylight and brightly lit areas.
LED has extra long life and produces an intense blue light.
Uses 3) AAA batteries.
Anodized aluminum, rugged construction.
Nylon wrist lanyard.
FLUORESCENCE ENHANCING GLASSES:
Makes leaks easy to spot.
Works with all fluorescent dyes.
Safety rated, laser engraved with DIN EN 166 CE.

The Robertshaw 1970 Series Thermocouple Uni-Couple® design allows for installation to virtually all pilot burners. The versatile zip nut may be pushed, pulled or threaded onto the thermocouple's rolled threads for proper positioning in every application.

Features and Benefits

Easy burner installation with attached threaded nut
Stainless steel outer jacket for long life and resistance to heat blistering
Combination of copper and nickel alloys for good electrical conductivity
Mica washer to insulate from shorting conditions
Tinnerman clip included
Various lengths available for multiple applications

This scale measures up to 220 lbs (100 kg). It may be used in either manual or programmable mode.

2-1/8 x 20''

Service kit (NC); diaphragm assembly, O-ring, (4) screws, armature assembly, rubber gasket, compression spring

Evaporator Fan Universal Motor Kit 120 Volt 3000 RPM, Single Speed CW -clockwise rotation OR CCW-counter clockwise rotation. Replaces over 450 different evaporator motor types, Break off 2" Motor Shaft with Breakaways at 1/2" and 1-1/2".

Features/Benefits

Break off 2" motor shaft with breakaways at ½" and 1 ½"
CSA® Approved
Impedance protected
Includes all mounting accessories and hardware
Prefastened multi fit, break off mounting bracket
Replaces over 450 different evaporator type motors
Reversible rotation
Shaft diameter ⅛"
Single speed
UL® Recognized

The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.

Features and Benefits

Convertible feature allows selection of manual or reset function when operating at high pressure (O12‑4833/O12-4834)
A wide range of high-pressure manual or automatic reset controls can be replaced (O12-4833 or O12‑4834)
A high-pressure limit is combined with suction pressure sensing to provide temperature control and/or pump down
High-limit adjustment screw
Low-pressure differential and range adjusting screws
Selector screw for manual or automatic
Reset button
Low-pressure scale plate
High-impact plastic cover with center mount screw
High-pressure scale plate
Super Cap® capillary protection system
Color-coded for easy identification of pressure line
High-side capillary flare nut (silver)
Low-side capillary flare nut (brass)